Install The Tank - Kohler K-19796 Installation Manual

Carriage Bolt
Valve Nut
Sealing Ring
Washer
Nut

2. Install the Tank

Position the sealing ring on the valve nut.
Position two carriage bolts in the notches on the mounting plate.
Thread the supplied supply hose onto the water inlet on the
bottom of the tank.
Position the tank on the bowl, aligning the carriage bolts with the
corresponding holes in the bowl and running the supply hose
through the corresponding hole.
Slide a washer onto each carriage bolt and thread a nut onto each
carriage bolt.
Wrench tighten. Do not overtighten.
Kohler Co.
Carriage Bolt
Mounting
Plate
Supply Hose
Valve Nut
5
Mounting
Plate
1052867-2-A