The system monitor must support the image recording function (videos/photos). When connected to the M-IP-GB2 unit, the photo memory and calendar function will be activated immediately; for the video memory function, a 16 GB Class 10 MicroSD card (not included) is required.
Step 1: Install the DIN rail on the wall, securing it with the screws supplied. DIN rail Step 2: Pull the mounting tab, then lightly press the unit against the wall. DIN rail Mounting tab NOTE: Before connecting the M-IP-GB2 module, disconnect the system's power supply.
MEMORY MODULE: M-IP-GB2 OPERATING MODE BUTTONS In-use CHECK CALL Power Video DT-CHK IP-CHK Description of the status LEDs: LED indicator Descrip POWER - LED fixed, status OK. - LED blinking, initialising system, approx 15 seconds. LIGHT - Not used - Not used...
MEMORY MODULE: M-IP-GB2 WIRING DIAGRAM: Video door entry system building installation with M-IP-GB2 image module. VESTA2 SE Master ( ) 3 ( ) 3 APARTMENT 23 End of line VESTA2 SE Master APARTMENT 2 ( ) 3 ( ) 3...
MEMORY MODULE: M-IP-GB2 DATE/TIME SETTING To change the date and time displayed on recorded videos/photos, press in the VESTA 2 SE monitor menu and use buttons to go to the 'Settings' option. Press once in the 'Settings' menu, keep the button pressed for 3 seconds and then set the date and time.
Page 8
C/ Silici, 13 08940- Cornellá de Llobregat SPAIN Golmar se reserva el derecho a cualquier modificación sin previo aviso. Golmar se réserve le droit de toute modification sans préavis. Golmar reserves the right to make any modifications without prior notice.