Page 2
HM-TRLR-EVB Manual 1.Instruction: HM-TRLR-EVB is a demo board design for HM-TRLR RF module.It has two working mode.(online and offline).When turn into online mode,the demo board works with software TRLR-PCConfig.At this time the user can modify the parameter and test the AT order etc.When turn into offline mode.At this time the user can test communication and low power...
Page 3
Valid only for setting HM-TRLR-S Series Moudle RF module modulation mode choice Working frequency choose ,pay attention to the working frequency. Valid only for setting HM-TRLR-S Series Moudle LoRa modulation, wireless baud rate Write and read parameter Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com...
Page 4
3) Cleck the “Write” button. If succeed that Tx Led flickers and display “Write Success”. If failed, display “Write Fail”. 2、Test interface operation: AT command button AT command test check box. Hexadecimal display Send data automatically add a carriage return Send data content Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com...
Page 5
5)Fill send data content and click the “Send” button. 5. Off-line operation: When in the off-line mode ,please confirm if jumper J2/J2/J4/J5/J3 connect to EVB-side. Plug HM-TRLR module in demo board and choose the right serial parameter in J1. Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com...
Page 7
2)Automatic communication test: When one of the test board into transmit mode and another into receive mode,then the buzzer beeps.That means it received data. Pay attention: Test boards do not, turn off the power. Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com...
Need help?
Do you have a question about the HM-TRLR-EVB and is the answer not in the manual?
Questions and answers