Related Manuals for HSC ELITE AC1400E
Summary of Contents for HSC ELITE AC1400E
- Page 1 ELITE AC1400E MOBILE AIR CONDITIONER USER MANUAL PLEASE READ THIS USER MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE...
-
Page 2: Technical Specifications
TECHNICAL SPECIFICATIONS AC1400E Model number Power supply 220-240v~, 50Hz Cooling capacity 15000BTU/hr 4.3kw/hr Power consumption for cooling mode 1650W 7.7A Air volume 500 m Moisture removal 40L/day Compressor Rotary Refrigerant R290 / 300g Fan speed settings Timer 24 hours Working temperature 18 ~ 32°C Exhaust pipe Ø... - Page 3 SAFETY For indoor use only Do not use in confined spaces Do not use in wet environments Leave the appliance to stand for at least 12 hours before connecting to the mains supply after transport or if the unit is tilted ...
- Page 4 PARTS 1. Control Panel 7. Exhaust Air Outlet 2. Air Outlet 8. Cord Storage 3. Side Air Filter (Air Inlet) 9. Drainage Point 4. Caster 10. Handle 5. Handle 11. Water Bottle 6. Air Filter (Air Inlet) ACCESSORIES 12. Exhaust Hose 13.
-
Page 5: Installation
INSTALLATION The unit is a portable air conditioner that may be moved from room to room. General Information about Installation: Only open the window as far as necessary and guide the end of the hose to the outside. • Use only the hose provided. Clip the exhaust hose and unit adaptor to the back of the air conditioner... - Page 6 WARNING: The exhaust pipe supplied with this appliance has been specifically designed for use with the appliance. Should it need replacing, please ensure that the correct length is used and that the part is a genuine ELITE part.
-
Page 7: Operation
OPERATION 1. Fan speed A. Fan speed indicator (low) 2. Sleep B. Fan speed indicator (medium) 3. Timer C. Fan speed indicator (high) 4. Mode D. Sleep mode indicator 5. Temperature UP E. Timer indicator 6. Temperature DOWN F. Display window 7. -
Page 8: Setting The Mode
SETTING THE MODE Press the MODE button to select required working mode: cooling, fan or dehumidify. Confirm the correct indicator is displayed SETTING THE TEMPERATURE 1. Press the 'Temperature up' or 'Temperature down' button to select the temperature you desire. 2. -
Page 9: Dehumidify Mode
DEHUMIDIFY MODE In dehumidify mode, the temperature cannot be adjusted, the ventilation will fix at low speed. When the unit is operating in Dehumidify mode, humidity extracted from the air is collected in an internal tank. If the tank reaches full, the compressor and motor cut out automatically. At the same time, the “Water Full”... -
Page 10: Self-Diagnosis
SELF-DIAGNOSIS This appliance is equipped with self-diagnosis function. If something is wrong in the machine, the display window will show the sign: E1, E2, E3 or E5, which reflects different condition. At this time, please call your service centre. EFFICIENCY BOOSTING This appliance is equipped with “energy efficiency boosting”... - Page 11 DRAINAGE When the unit is operating in Cooling or Dehumidify mode, humidity extracted from the air is collected in an internal tank. If the tank reaches full, the compressor and motor cut out automatically. At the same time, the “Water Full” indicator comes on. An alarm will also sound.
-
Page 12: Maintenance
Should you prefer to use the appliance without having to empty the tank every so often, proceed as follows: • Remove the drain knob and rubber plug and retain for future use. Connect the drain tube supplied to the water outlet as shown and locate the other end into a suitable water container or tray. -
Page 13: Troubleshooting
END OF SEASON STORAGE Drain any water in the unit before completely operating the unit on ventilation only mode for a few hours, to thoroughly dry the inside. Clean or change the filter Unplug and store the power cord on the cord hanger. ...
Need help?
Do you have a question about the ELITE AC1400E and is the answer not in the manual?
Questions and answers