Crosley CR612B Instruction Manual page 7

English
3. To cancel the sleep timer, press the Sleep button repeatedly until "OFF"
shows on the display.
CD Playback Operation
1. Press the Power Button to turn the unit on.
2. Press the Mode Button to the CD mode (CD)
3. Press the CD Door Button to open the CD tray and put the CD in the tray with
the labeled side facing up.
4. Manually close the CD Door. The LED display will show "--" for a few
seconds, then the total number of tracks on the CD. If it is a blank CD or an
unrecognizable CD, it will show "NO".
Note: MP3 or similar types of digital audio files cannot be read by the CD player.
5. Press the Play/Pause button to start the playback.
6. During the playback, press the Play/Pause button to pause. Press it again to
resume playback.
7. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly.
8. To search fast forward or backward a track, press and hold the Forward Skip
or Backward Skip button correspondingly until you reach the desired time.
Release the button and the playback will resume.
9. To repeat a specific track, press CD Mode button once while that track is
playing and the repeat indicator will start flashing. To repeat all the tracks,
press the CD Mode button twice and the repeat indicator will remain on. To
randomize all of the tracks, press the CD Mode button three times, and the
random indicator will remain on. To cancel repeat functions and random
function, press the CD Mode button four times.
10. Press the Stop button if you want to completely stop playback.
Programmed Playback
1. Before starting the playback, press the Program button once to enter
program mode. Program Indicator will start flashing. The LCD display will
flash "P - 01" as the track sequence which is to be edited.
2. Press the Forward Skip or Backward Skip buttons to select the desired
track that you would like to play. The LED's number will turn steady
instead of flashing, showing the sound track number at selection.
3. Press the Program button to confirm the selected track. The LED's
number will start flashing again showing the next track sequence which is
to be edited.
4. Repeat steps 2 & 3 for additional sound tracks that you would like to play.
The tracks can be in any number and repeated. A maximum of 20 tracks
can be programmed at one time.
7