Table of Contents
Advertisement
• Sensor Pairing
• Tire Deflation Sensor Pairing
1. Press "
", then select
"Sensor Pairing" -
>Deflation.
Repeat step 1-3 for any
remaining tires with sensors.
Note: Sensor will transmit
learning signal for 10 minutes
after sensor's battery is installed.
If additional time is required,
remove and reinstall battery to
restart learning signal.
2. Select tire location #.
3. Install sensor on the valve stem
of the associated tire, being
careful not to over tighten.
4. App will search for deflation
signal and display sensor's ID
number.
Advertisement
Table of Contents
Need help?
Do you have a question about the NCTP100 and is the answer not in the manual?