Do you have a question about the WALKER PRO and is the answer not in the manual?
Questions and answers
Steve
February 15, 2025
E02 and E04 codes pop up after countdown ends
1 comments:
Mr. Anderson
May 14, 2025
For the EGOFIT PRO:
- E02 error: There is no voltage output or an abnormal voltage output from the lower controller to the motor. The solution is to change the lower controller.
- E04 error: There is an overvoltage protection issue, meaning the load on the treadmill exceeds the motor's rated working voltage. The load must be within the rated operational voltage, and if needed, change the motor.
Need help?
Do you have a question about the WALKER PRO and is the answer not in the manual?
Questions and answers
E02 and E04 codes pop up after countdown ends
For the EGOFIT PRO:
- E02 error: There is no voltage output or an abnormal voltage output from the lower controller to the motor. The solution is to change the lower controller.
- E04 error: There is an overvoltage protection issue, meaning the load on the treadmill exceeds the motor's rated working voltage. The load must be within the rated operational voltage, and if needed, change the motor.
This answer is automatically generated