Download Print this page

Little Giant Drainosaur Jr Instruction Sheet

Wastewater removal system with 5-asp pump

Advertisement

Quick Links

(Pump Only)
The "DRAINOSAUR Jr." removes water from laundry
trays, lavatory sinks, wet bar sinks, dehumidifiers,
air conditioners (condensate), water softeners, etc.
Installs above floor, no need to dig a sump. Unit is
pre-assembled and ready to install.
WRS-5
Features
Pump made of cast aluminum housing with
n
protective epoxy coating for corrosion resistance
Screened intake
n
1/6 HP motor with thermal overload protection
n
Automatic diaphragm pressure switch enclosed in
n
nylon housing with "on" level at 7"–10" and "off"
level at 1"–4"
Basin made of polypropylene — light weight, and
n
corrosion resistant
Basin designed with O-rings to provided a
n
water-tight seal
Basin cover comes with a removable filter screen
n
for easy cleaning
Cover comes with 1-1/2" FNPT discharge
n
opening, a 1-1/2" FNPT intake opening and a
2" FNPT vent opening
IAPMO listed basin
n
Pre-assembled, ready to be installed
n
Basin Designed with
Basin Made of
Light Weight
Corrosion Resistant
Polypropylene
Automatic Diaphragm
Pressure Switch
Enclosed in
Nylon Housing
Waste Water Removal System
O-rings for
Water-tight Seal
Drainosaur Jr.
10' Power Cord
and Switch Cord
Cover Designed with
3 Openings and
Removable Filter Screen
for Easy Cleaning
Pump with
Thermal Overload
Protection
Cast Aluminum
Pump Housing
with Protective
Epoxy Coating
for Corrosion
Resistance

Advertisement

loading

Summary of Contents for Little Giant Drainosaur Jr

  • Page 1 Drainosaur Jr. Waste Water Removal System WRS-5 Features Pump made of cast aluminum housing with protective epoxy coating for corrosion resistance Screened intake 1/6 HP motor with thermal overload protection Automatic diaphragm pressure switch enclosed in nylon housing with “on” level at 7"–10" and “off” level at 1"–4" Basin made of polypropylene — light weight, and corrosion resistant Basin designed with O-rings to provided a water-tight seal Basin cover comes with a removable filter screen for easy cleaning Cover comes with 1-1/2" FNPT discharge opening, a 1-1/2" FNPT intake opening and a 2" FNPT vent opening IAPMO listed basin Pre-assembled, ready to be installed (Pump Only) 10' Power Cord Basin Designed with and Switch Cord O-rings for Cover Designed with...
  • Page 2: Specifications

    WRS-5 Specifications Flow (GPM @ Head) Model Item Running Shutoff Weight Dimensions Discharge Listing Volts Amps/Watts Head (ft.) (lbs.) (W x H) (in.) UL/CSA/ WRS-5 505055 1-1/2" 3/10 5/380 14.5 x 15.56 IAPMO UL/CSA listing for pump only Pump Construction Motor Housing Epoxy-coated cast aluminum Impeller Material...
  • Page 3: Maintenance

    3” from top of basin cover and a union. The Little Giant pump you have purchased is of the highest quality workmanship Be sure check valve is installed in proper flow direction. If check valve and material, and has been engineered to give you long and reliable service.
  • Page 4: Typical Installation

    TYPICAL INSTALLATION SPECIFICATIONS GALLONS PER HOUR (GPH) AT MODEL CATALOG SHUTOFF MAX. HEIGHT VOLTS HERTZ AMPS WATTS NUMBER NUMBER (FT.) 5’ 10’ 15’ WRS-5 505055...
  • Page 5 Mounting hole lines up with a locating rib on the inside of the basin. Position alignment plate (11) inside basin (4) as shown. This will allow proper alignment of mounting holes when installing basin cover (1). Any other postion will prevent installation of cover. PART ITEM NUMBER...
  • Page 6: One-Year Limited Warranty

    ..... . . 1.888.572.9933 Para la ayuda técnica, por favor póngase en contacto ..1.888.956.0000 www.LittleGiantPump.com CustomerService-WTS@fele.com Form 993800 - 12/2007 © 2007 Franklin Electric Co., Inc. Little Giant® is a registered trademark of Franklin Electric Co., Inc.

This manual is also suitable for:

Wrs-5505055