Fault Finding Chart For Gsm900 Transmitter - Nokia RH-37 Series Rf Troubleshooting Instructions

RH-37
6(b) - RF Troubleshooting Instructions
Now the measurement equipment should detect the following output signal of the
phone:
P = +24.5 dBm @ 897.4 MHz
out
If this is not the case, go to the EDGE fault finding chart for GSM900 transmitter.

Fault finding chart for GSM900 transmitter

In the following, it is assumed that the TXP signal is used as trigger signal. For that, a
TXP test point is provided.
Page 22
Nokia Corporation
Nokia Customer Care
Issue 1 07/04