Dismantling Of Keymat Cover - Nokia NHL-2NA Series Disassembly Instructions Manual

NHL-2NA

Dismantling of keymat cover

1 Take keymat cover in hand so that battery connector is facing upwards.
2 Gently pry out the grip pwb Left side (first from upper side then bottom) from
keymat cover locking clips. Dismantle grip PWB sliding it to left side direction.
Note! When assembling grip PWB assemble first right side then left side.
3 Put grip PWB to a dust free place.
4 Lift away keymat from keymat cover.
Note! If new keymat is assembled remember to take protective tape away from key mat.
5 Pry out magnet with a sharp tool from keymat cover (be careful not to scratch
keymat cover).
Page 6 ãNokia Corporation
CCS Technical Documentation
Issue 1 07/02