NHL-2NA
Phone with grip opened onto disassembly jig
1 Place the phone onto lower tool cavity upside down.
2 Install upper part on the lower part so that the nails are in the phone tracks.
3 And in the same time put the upper part guides to the lower part grooves.
4 Push the upper part till end of the grooves (opening direction).
5 Pull with your thumb from battery cavity to completely disassemble phone.
6 Push the upper part back to the starting point.
7 Remove the upper part.
Page 2
ãNokia Corporation
CCS Technical Documentation
Issue 1 07/02