Advertisement

Quick Links

Instructions
for proper usage
of mechanical wheelchair IRIS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kury and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IRIS Kury

  • Page 1 Instructions for proper usage of mechanical wheelchair IRIS...
  • Page 2: Table Of Contents

    C O N T E N T S Dear user, The mechanical wheelchair KURY is constructed in a way to meet the highest requirements of quality, functionality, safety and design. The wheelchair is made of light aluminum alloys and that is why it requires proper usage and common every-day maintenance.
  • Page 3: Wheelchair Design

    D E S I G N O F T H E M E C H A N I C A L W H E E L C H A I R I R I S DESCRIPTION OF THE BASIC PARTS A WHEELCHAIR FRAME F FRONT WHEEL B SEAT...
  • Page 4: Back Rest Tilting

    W H E E L C H A I R M A N I P U L A T I O N TILTING OF THE BACK REST To adjust or tilt the back rest, use the elastic drawbar. Pull at the wire – the securing pins will loosen and you will be able to set the angle of the back rest (8 degrees forward, 8 degrees backward) or tilt the back rest...
  • Page 5: Removing The Rear Wheel

    A D J U S T M E N T O F T H E W H E E L C H A I R REMOVING THE REAR WHEEL 1. Make sure that the wheel is not stalled. . Press the button at the centre of the wheel by your thumb.
  • Page 6: Setting The Height And The Angle Of The Foot Rest

    A D J U S T M E N T O F T H E W H E E L C H A I R ADJUSTING THE FOOT REST Setting the height of the foot rest On both sides of the wheelchair frame, loosen the bolts (M) and remove them.
  • Page 7: Setting The Textile Padding And The Back Rest

    A D J U S T M E N T O F T H E W H E E L C H A I R ADJUSTING THE TEXTILE PARTS Setting the firmness of the textile padding of the back rest By using the clasps and Velcro adjust the tension in the back rest as you desire.
  • Page 8: Adjustment Of The Centre Of Gravity / Adjustment Of The Seat

    A D J U S T M E N T O F T H E W H E E L C H A I R ADJUSTING THE CENTRE OF GRAVITY Wheelchair IRIS has a firmly defined frame. The size (diameter) of the wheels: - front wheels R 100/1 - rear wheels R 4 x 1”...
  • Page 9: Push Rims

    U S I N G T H E W H E E L C H A I R PUSH RIMS There are two types of push rims: - aluminum with elox coating - stainless - coated with softened plastic Stainless push rims can be repaired. Aluminum push rims, if the elox coating is damaged, can make the hands dirty and cannot be repaired.
  • Page 10: Principles Of Safety

    U S I N G T H E W H E E L C H A I R DYNAMIC STABILITY: When riding up a slope or overcoming slightly forwards. Then give another impulse a frontal obstruction, it is recommended to to come to the obstruction with the rear lean slightly forward.
  • Page 11: Storage And Maintenance

    M A I N T E N A N C E / G U A R A N T E E STORAGE AND MAINTENANCE Store your wheelchair in a dry and dust-free place. Improper storage (cellars, garages etc.) can result in malfunction of the wheelchair and thus may cause danger.
  • Page 12: Service

    SERVICE To use the service, please contact the manufacturer – the company KURY: • tel.: +40 466 936 139 • fax: +40 466 936 138 • email: kury@kury.cz • web: www.kury.cz • adresa: KURY spol. s r.o. Zdechovice 8 33 11 Zdechovice...

Table of Contents