■ do not abuse the cord. never use the cord for ImPoRtant! carrying, pulling or unplugging the power tool. It is essential that you read the instructions in this Keep cord away from heat, oil, sharp edges or manual before assembling, operating, and maintaining moving parts.
Page 3
with the switch is dangerous and must be repaired. ■ Follow all charging instructions and do not charge the battery pack or tool outside the temperature ■ disconnect the plug from the power source and/ range specified in the instructions. Charging or remove the battery pack, if detachable, from improperly or at temperatures outside the specified the power tool before making any adjustments,...
tRanSPoRtInG LItHIum BatteRIeS Transport the battery in accordance with local and national Waste electrical products should not be provisions and regulations. disposed of with household waste. Please recycle where facilities exist. Check with your Follow all special requirements on packaging and labelling Local Authority or retailer for recycling advice.
KnoW YouR PRoduCt 1. Medium bristle nylon brush 2. Connector 3. On/Off button 4. Handle, insulated gripping surface 5. Battery port 6. Battery cover...
Page 9
NOTE: The battery cover is not designed to accommodate a battery capacity above 5.0Ah. To ensure IPX7 compatibility, lock the battery cover in place before use.
Compact power scrubber standardised test and may be used to compare one tool with Model R18CPS another. They may be used for a preliminary assessment of exposure. Voltage 18 V...