Table of Contents
Advertisement
CERTIFICATION
The P-1000 is installable into an aircraft under one of the following conditions:
1.
With an STC issued for your model aircraft allowing the P-1000 to replace the existing mechanical tachometer.
2.
With a one-time-only STC issued for installation of the P-1000 on your aircraft, this is typically referred to as a "Field Approval".
A P-1000 purchased with an STC for replacement of the existing mechanical tachometer will have attached to this documentation
package:
Supplemental Instructions and Drawings pertaining to the specific installation of the P-1000 in the indicated aircraft.
Flight Manual Supplement
A copy of the applicable STC
The Supplemental STC information supplied with a P-1000 is dependent upon the information supplied to Horizon Instruments, Inc. at the
time the P-1000 is ordered. If this information is erroneous, applicable to a different type of aircraft, or missing, do not proceed with
installation. Contact the Horizon Instruments, Inc. Technical support staff for further instructions.
NOTE:
The STC Approval accompanying a P-1000 tachometer is considered proprietary information by horizon Instruments, Inc. and is not
applicable to any other manufacturer's equipments.
HORIZON INSTRUMENTS, INC.
P-1000 INSTALLATION & INSTRUCTION MANUAL
Title:
P103050
E
Number:
Revision:
8 of 23
Page:
Hide quick links:
Advertisement
Table of Contents
