Advertisement
Operating Booster 630
First of all choose the right battery voltage (12 V or 24 V), then connect the first battery clamp
with the battery pole.
Switch the operating switch 1 to "1," "2" or "3" for a normal speed charging.
On "4," "5" and "6" the charging process is supported by the timer. To do this, the timer is set
to the desired time.
If you wish to start a car engine via the booster, turn operating switch 1 to "START," charge
the battery for 2 min. Then disconnect the charger from the battery and try starting the car
engine for max. 4–5 s. If the engine does not start after 3–4 tries, wait 10 more minutes before
trying to boost charge the car battery again.
Control panel elements
№ Name
1
Operating switch
2
Amperemeter, measures the amperage
3
Fuse
4
Mass (–)
5
DC 24 V output
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
6
DC 12 V output
7
AC 230 V input
8
Timer
9
Power supply LED
Item 30560, 30562
Page 6
03
2021-1
Advertisement
