Advertisement
Operating Booster 430
First of all choose the right battery voltage (12 V or 24 V), then connect the battery clamps
with the battery poles.
Switch the rocker switch 4 to "CB," switch 2 to MIN or MAX, then switch 3 to "1" (normal
charge) or "2" (boosted charge).
Then turn the charger on by switching the main switch 5 to "on" ("I"); the charging process will
start.
If you wish to start a car engine, push switch 4 to "START," then switch 5 to "on" ("I"), charge
the battery for 2 min. Then disconnect the charger from the battery and try starting the car
engine for max. 4–5 s. If the engine does not start after 3–4 tries, wait 10 more minutes before
trying to boost charge the car battery again.
Control panel elements and their functions
№ Name/function
1
Amperemeter, measures the amperage
2
Operating switch 2: Min/Max
When choosing "START", switch to "Max."
When choosing "CB" ("charge battery"), it means: "MIN" will charge in boost phase
(when large capacity batteries are deeply discharged and turned onto the more power-
ful charging options, 2 or MAX, overload protection may be activated); in this case
charge the battery for a short period on "MIN" option. If the battery charges without any
disruptions, it can be switched to "MAX."
3
Operating switch 3: level 1/2 (I/II)
"1" = normal charging, "2" = fast charging
(This switch is only used for charging purposes; when starting, this switch has no function.)
4
Operating switch 4:
"CB" = charge battery; "Start"
5
Main switch
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 30560, 30562
Page 5
03
2021-1
Advertisement
