Dexter Laundry 20VIW2-350.1 Instructions Manual page 210

FR
5.OPERATION
ES
1. Use two hands to hold the tool.
PT
2. Push socket over fastener and squeeze switch slowly.
3. When finished, release and lock Trigger.
IT
4. To prevent accidents, turn off the tool and remove its Battery Pack after use. Clean, then
store the tool indoors out of children's reach.
EL
Note: The amount of actual torque will vary depending on the cleanness and condition of the
threads and other factors. If tightening critical components, chase threads before assembling
PL
components and check the actual torque applied to the fastener with a mechanical torque
wrench (not supplied).
RU
CAUTION: Please support and clamp the workpiece properly. Do not use hand to grip
or clamp the workpiece, it may cause injury.
UA
KZ
The tool has an LED light to illuminate the work area and improve vision when working in areas
with insufficient light.
RO
The LED light will switch on automatically while the trigger switch is depressed.
BR
6. MAINTENANCE
EN
The impact wrench is designed for use in temperate regions with a characteristic temperature
of 0 ° C to + 45 ° C, relative humidity not more than 80%, the absence of direct exposure to
atmospheric precipitation and excessive dust content of the air.
Do not use power tools in explosive areas where flammable liquids, gases, dust are present. It creates
sparks, which can lead to the ignition of dust, steam.
Shelf life - 4 years provided that the products are stored indoors with natural ventilation in the
package at an air temperature of --20 ° C to 40 ° C and a relative humidity of not more than 80%
210
LED worklight
Application area
Requirements for room conditions
Storage conditions