Dexter Laundry 20VIW2-350.1 Instructions Manual page 204

FR
2. GENERAL POWER TOOL SAFETY WARNINGS
ES
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
PT
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
IT
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in
EL
a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
PL
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
RU
BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the manufacturer. A charger that is
UA
suitable for one type of battery pack may create a risk of fire when used with another battery
pack.
KZ
b) Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
RO
c) When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a
BR
connection from one terminal to another. Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
EN
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire
or temperature above 50 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside
the temperature range specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the battery and increase the risk of fire.
SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorized service providers.
204