Heusinkveld Sim Pedals Ultimate+ Product Manual page 10

Use case 4: Early brake lock compensation
Some cars in certain titles are known to lock the wheels well
before maximum brake input is reached, for example already
at 70% of pedal input. SmartControl allows you to set a lower
output percentage at 100% pedal input.
This means you can use the full force range of your brake
(close to 100% pedal input instead of 70% pedal input) pedal
before your wheels start locking up.
10
Using SmartControl with iRacing
The Sim Pedals Ultimate+ output values per pedal axis
always range from 0-4095, regardless of your settings in
SmartControl. Most simulator software can instantly use
these output values, because Windows works with a default
range of 0-4095 for 12bit USB devices as well.
A notable exception is iRacing, because iRacing uses an
ingame method to calibrate the pedals. In order for the Sim
Pedals Ultimate+ to function correctly in iRacing, you must do
the following:
1. When using the pedal calibration wizard in iRacing, you will
see a RAW value. When asked to press a pedal, make sure
you always press it to a value of 4095 for every single pedal.
2. Always set the Brake Force Factor to 0. This ensures
that your SmartControl settings always function correctly
in iRacing. You will only need to calibrate in iRacing once.
Re-calibration after changing SmartControl settings is not
required.
iRacing offers the optional setting 'custom controls for
this car'. If you use this setting, always make sure to follow
instructions 1 and 2 per car in order for your SmartControl
adjustments to function correctly in iRacing.