Advertisement
Quick Links
Advertisement
Related Manuals for MyBinding Formax FD 4040
Summary of Contents for MyBinding Formax FD 4040
- Page 1 Formax FD 4040 Bi-Directional Drop- Stacking Conveyor Instruction Manual...
- Page 2 FD/FE 4040 4’ Conveyor FD/FE 4060 6’ Conveyor MyBinding.com 5500 NE Moore Court OPERATOR MANUAL Hillsboro, OR 97124 Rev 2 Toll Free: 1-800-944-4573 7/2015 Local: 503-640-5920...
-
Page 3: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS UNPACKING ASSEMBLY Mounting Adjustable Legs Control Panel Module (Optional adjustment) Mounting Accessories MOUNTING OPTIONAL D1000 1K DRYER SETUP & OPERATION 9 - 11 MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920... -
Page 4: Specifications
4. Carefully check for missing parts. If damage or missing parts are noted, contact your Sales Representative immedi- ately. Save cartons and packing materials. They may be required to substantiate a damage claim or to return a damaged unit. MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124... -
Page 5: Assembly
ASSEMBLY Mounting Adjustable Legs Install 2 swivel casters on each of the leg assemblies (Fig 1 item A). Secure casters with hex nuts. To pre-adjust leg assemblies to proper length, measure the distance from the floor, to the exit surface of the delivery device (i.e. -
Page 6: Control Panel Module (Optional Adjustment)
CAUTION! Two (2) people are required for lifting and turning conveyor. Control Panel Module Conveyor shown going left to right Control Panel Module Front of control panel module Fig 5 MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920... -
Page 7: Mounting Accessories
Mounting Accessories Envelope knockdown bracket assembly (Fig 6): To install, temporarily mount the envelope knockdown post (Fig 6 item A) in the down position, as shown below. Use thumb screw and securing plate (Fig 6 items B & C) to attach the post to the bracket. - Page 8 (Fig 8d) to ensure clearance at all points on the roller and belt. Readjust if belt contacts bracket. Fig 8a Fig 8b Ensure clearance between belt and bracket Mounting screws Fig 8c Fig 8d MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920...
- Page 9 2 black thumbscrews provided. The wheels can be repositioned anywhere along the rod to meet your specific needs. MyBinding.com 5500 NE Moore Court Fig 11 Hillsboro, OR 97124 Toll Free: 1-800-944-4573...
- Page 10 Install adjustable height drop tray (Fig 12 item A) into slots in leg assembly (Fig 11 item B). Install envelope stop plate (Fig 12 item C) onto drop tray using 2 hand wheel nuts provided (Fig 12 item D). Place envelope side guides (Fig 12 item E), magnetically mounted, onto drop tray. Fig 12 Attach the mounting bracket (Fig 13 item A) to the conveyor.
-
Page 11: Mounting Optional D1000 1K Dryer
CAUTION! Do NOT connect dryer to a separate power source or dryer damage may result. Connect dryer power cord only to outlet on conveyor, as shown below. Fig 14a Fig 14b Mounting Rods Fig 15b Fig 15a MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920... -
Page 12: Setup & Operation
SETUP & OPERATION Place completed conveyor assembly behind delivery device (i.e. printer) with fans centered on exit end of delivery device. Attach conveyor mounting bracket to table that the device is sitting on for stability using lag bolts provided, see mounting details supplied with bracket. The top of the front guide rail (Fig 16a item A), should be positioned about 1 inch below the exit surface of the delivery device (i.e. - Page 13 Note: At very low conveyor transport speed settings the transport belt may stall easily, especially when the fans and/or dryer are being used. Increase the transport speed setting to prevent this condition. Control Panel Power Toggle Switch Fan Toggle Switches Speed Control MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920...
- Page 14 Send several test pieces of media through delivery device and conveyor to ensure correct set up. Make adjustments if necessary. The conveyor is now ready for operation. Fig 18 MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573...
- Page 15 MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920...
Need help?
Do you have a question about the Formax FD 4040 and is the answer not in the manual?
Questions and answers