Charging The Battery - KINGSONG N1-A User Manual

FR
Your KINGSONG SCOOTER has an external charger. Connect the charging cable to KINGSONG
EN
SCOOTER's charging socket under the footboard, on the right side at the rear.
Than connect the chargers electric cable to an electrical outlet.
Charging Light Red
Charging Light Green
Avoid long periods of time with an uncharged or fully charged battery.
To maximize your battery performance, fully charge it for 9 hours, once a month, or after each use of twelve hours.
Unplug KINGSONG SCOOTER from the outlet before installing, removing the battery or
performing any maintenance. It is dangerous to work on KINGSONG SCOOTER when plugged into an AC outlet.
Electrical shock can cause serious injury and damage the scooter.
Do not attempt to open the battery. Do not insert anything in the battery and do not attempt to open its case with any
tool. Inserting an object into openings or in the battery can cause electrical shock, injury, burns or re. Any attempt to
open the battery case will damage it and cause release of dangerous toxic substances.
Charge the battery only using tools approved by KINGSONG SCOOTER.
Remove the battery and carry KINGSONG SCOOTER according to all applicable local and national requirements.

8.1 Charging the Battery

Your product comes with a built-in lithium-ion battery. Before first use, you must fully charge the battery. Be sure to
charge the battery in a clean and dry place. Plug the connector into the scooter and the other end of the power cord
into a grounded outlet. The charging red light on the charger lights up. The charger can take up to 3 hours for a full
charge. The charger's red light turns green after charging is completed.
- Battery is charging.
- Charging is complete.
39