START NOW WITH LOGGITO This brief introduction is intended to show you how to quickly and simply start working with Loggito devices. To avoid errors in startup, please read the short information provided here. For further details, refer to the online help using F1 after installing the software. Included in delivery Please check the delivery contents immediately on receipt.
Page 3
Overview of delivery contents Loggito Logger Loggito USB Loggito Gate Loggito device DVD incl. license pass and DataService Con gurator Pro Signal software-DVD optional optional optional Web / Go / Basic / Klicks Pro Signal Web optional – optional software preinstalled USB cable LAN cable –...
SOFTWAREINSTALLATION On the enclosed DVD you will fi nd the corresponding DataService / Confi gurator software as well as a Profi Signal version and corresponding software options (depending on license). During software installation, your license fi le can be accessed from the enclosed DVD. Please keep the DVD safe as it contains your personalised license details.
DataService / Confi gurator, you can search for the device in the “Connections“ tab by right-clicking on “DataService ID xxxx“ → “Add driver“ → “Search Delphin devices in LAN“ overview. In the overview, select your device by ticking “Add“ and confi rm with the “Add“...
Page 7
USB PC-connection (Loggito USB only) For a USB PC-connection, device drivers may need to be installed. After starting the DataService / Configurator, the device is directly accessible and can be configured. USB connection to Loggito Logger / Gate (Loggito USB only) Connect your Loggito USB to the existing Loggito Logger / Gate with the supplied USB cable.
SOFTWARE START DataService / Configurator To configure channels or connect the devices to the PC, start the DataService / Configurator from your desktop or the Windows Start menu. The “Connections“ tab displays the existing connections and enables new connections to be added as described above.
CHANNEL CONFIGURATION Double-clicking on a channel opens a configuration dialog. You can use it to set names and sensor types as well as further details concerning the sensor or channel to be recorded. Clicking “OK“ saves input instantly to the device so measuring is performed from then on using the new settings.
Page 10
ONLINE ANALYSIS STARTING The ProfiSignal Go / Basic / Klicks software (optionally available) enables you to clearly display measured data as trends in diagrams (e.g. y(x), y(t), logic diagram) and then to analyse and export the data. After you have started the ProfiSignal software, create a new online analysis by clicking on “File“...
Page 11
For Pro Signal Web you get a separate Quick Start Guide.
Need help?
Do you have a question about the Loggit Series and is the answer not in the manual?
Questions and answers