Function; Maintenance And Care; Replacing A Filter - Franke FAID100 Installation And Operating Instructions Manual

14. Function

Stationary use
14.1 Press the trigger button.
• The water will flow.
• The safety cap will fall off.
14.2 Press the red stop button.
• The water flow will stop.
☞
The fitting is not self-closing. The user can use both hands to keep their eyes open!
Mobile use
☞
Depending on the length of the hose, the eye shower can also be pulled out of its
bracket.

15. Maintenance and care

Check once a month that the eye shower is in working order. (Guidelines for Labora-
tories BGI/GUV-I 850-0)
As a preventative measure to reduce microbiological contamination, it is recom-
mended to replace the water in the fitting at shorter intervals by opening the valve.
Use suitable cleaning agents which are not harmful to the fitting in a proper manner
and rinse with water after use. High-pressure cleaners must not be used for
cleaning.

16. Replacing a filter

FAR-Best.-Nr.: 2000101100
2000101101
2000105425
16.1 Close the water supply.
16.2 Loosen the cap nut (b).
16.3 Replace the filter (a).
☞
Important!
Note the installation position of the filter.
☞
The handle bar (d) must face forwards.
16.4 Reassemble in reverse order.
- 8 -