Advertisement
0.55
[ 14.0 ]
10-32 (2 pls)
MAX TIGHTENING TORQUE 30 IN LBS.
Apply the CKM12 unit to control any Maretron Load Controller device such as Maretron's CLMD16 or
CLMD12 by connecting CKM12 to the same NMEA 2000® Network. The CKM12's Out of Box
Configuration allows for Toggle Operation of the first 12 Electronic Circuit Breakers on Maretron's
CLMD16 and CLMD12 Load Controller Modules. This will only occur if the CLMD16 or CLMD12 is on the
same NMEA 2000® Network as CKM12 and also has a default Out of Box Configuration. Please see the
Out of Box Configuration details in this Quick Start Guide for information on how the
CKM12's default configuration will behave when a CLMD16 or CLMD12 is on the same
network with Out of Box Configuration.
Note: Depending on desired switch control, default configuration may not work for your application and
custom configuration will be needed using Maretron N2KAnalyzer®. Applying a CLMD16 and a CLMD12
containing default Out of Box Configurations or having two CKM12 units on the same NMEA2000®
network forces the need for custom configuration.
CKM12 Hardware Dimensions:
Not to Scale, for Reference Only
6.49
[ 164.8 ]
4.70
[ 119.4 ]
0.38
[ 9.5 ]
[ 19.1 ]
CKM12 Application:
P/N: M0031399 Rev. 1.2
2.35
[ 59.7 ]
1.45
[ 36.8 ]
0.75
Page 2
2.30
[ 58.4 ]
0.75
[ 19.1 ]
DEUTSCH PLUG DETAIL
NO.
DESIGNATION
6
1
1
BATT +
2
CAN L
5
2
3
BATT -
4
4
3
5
CAN H
6
CAN SHIELD
UNIT: INCH [MM]
Advertisement
