Advertisement
The CKM12 features 12 keys over-molded with a rubberized coating. The CKM12 requires only a
connection to an NMEA 2000® network to begin. Configure the CKM12 using Maretron N2KAnalyzer®
installed on a PC and an IPG100 or USB100 connected to the NMEA 2000® Network. CKM12 transmits
and receives NMEA 2000® PGN 127501. Each transmission of PGN 127501 reports the state of all key
positions every 15 seconds and each time a key is pressed. Each key has an LED that can be
configured to show the state of an MPower load controller ECB (Electronic Circuit Breaker) reported in a
received 127501 PGN. Assigning CKM12 control of an ECB or multiple ECBs is configured within the
MPower load controller(s) configuration while assigning CKM12's LEDs operation is configured within
the CKM12 unit's configuration.
CKM12 Features at a Glance:
·
Key Detent Provides Tactile feel when pressing
·
Configurable Operation and Appearance Aspect
·
All Key Positions have Blue LED's
·
Horizontal or Vertical Mounting Options
·
Screwless, Snap-In Mounting
·
IP69 Rated (front) IP68 (rear) with Plug for Unused Connector
·
LED Feedback of Controlled Circuit State
·
NMEA 2000 LEN: 2 (Max Current 100mA)
·
Operating Voltage: 8 - 32 VDC
·
Endurance Tested to Reach Minimum of 1,000,000 Operations
To learn more about the MPower CKM12's features please refer to the User's Manual located on
the Blue USB Disc. See launch instruction below to access USB Disc Menu.
Thank you for purchasing MPower CKM12
P/N: M0031399 Rev. 1.2
Page 1
Advertisement
