Preparing For A Shot; Using The Golf Simulator Features - Garmin APPROACH R10 Owner's Manual

1 Place the ball at the desired tee location.
NOTE: The tee location must be at least 8 ft. (2.4 m) away from the net when playing indoors.
2 Attach the device to the tripod mount
3 Place the device on the ground between 6 ft. and 8 ft. (1.8 m and 2.4 m) behind the tee location.
NOTE: If you are using a golf mat, make sure the bottom edge of the device sits above the mat.
4 Adjust the device so the red alignment line is aligned with the tee location and the target of the shot.
TIP: You can lay a golf club on the ground between the alignment line and tee location to confirm they are
lined up.
5 If necessary, you can move the tee location up to 1 ft. (0.3 m) on either side of the target line, within a 2 x
2 ft. (0.6 x 0.6 m) hitting area that begins 6 ft. (1.8 m) from the device.
This may be helpful if your tee location becomes worn during a golf simulator game mode session.
NOTE: The ball and club angles are measured parallel to the target line.
6 Press the button to turn on the device.
7 Start a golf simulator game mode
8 Wait for the status LED to begin flashing green, and take a shot.
You can use the golf simulator features in the Garmin Golf app to test your skills and help you have fun on the
driving range. These features use the internal device radar to take measurements that help you analyze your
practice.
1 Open the Garmin Golf app on your paired smartphone.
2 Select an option:
• If you are using an iOS
• If you are using a device with Android
3 Select a game mode.
4 Follow the on-screen instructions.

Preparing for a Shot

Preparing for a Shot
(Installing the Magnetic Tripod Mount, page
(Using the Golf Simulator Features, page

Using the Golf Simulator Features

® device, select Golf Sim.
, select
™
5).
> Golf Sim.
4).
5