Installing The Magnetic Tripod Mount - Garmin APPROACH R10 Owner's Manual

Both the device and its mount may contain magnets. Under certain circumstances, magnets may cause
interference with some internal medical devices, including pacemakers and insulin pumps. Devices and mounts
that contain magnets should be kept away from such medical devices.
The mount contains a magnet. Under certain circumstances, magnets may cause damage to some electronic
devices, including hard drives in laptop computers. Use caution when the mount is near electronic devices.
1 Ensure the tripod mount is free of any debris.
2 Insert the top of the tripod mount into the back of the device.
The tripod mount is magnetic and holds the device in place.
NOTE: The tripod mount can only be installed one way. If it is not fully seated in the back of the device, you
have installed it using the wrong orientation.
3 Open the tripod legs so they are fully extended.
4

Installing the Magnetic Tripod Mount

WARNING
NOTICE
Installing the Magnetic Tripod Mount