Advertisement
Quick Links
Advertisement
Summary of Contents for HAKO Fleet-Recorder
- Page 1 Assembly Manual Fleet-Recorder (5305.00)
- Page 2 Scrubmaster B115 R. undertaken by a Hako service centre or make sure that only original spare parts a workshop authorised by Hako. are used. Only original spare parts...
- Page 3 Fleet-Recorder Scrubmaster B75 R Fleet-Recorder Scrubmaster B75 R Parts list 1 Fleet-Recorder 2 I-Button-Reader 3 User key 4 Antenna 5 Buzzer 6 Label Parts not displayed: 1x W77 cable loom 1x fuse insert 1x O-ring Fig. 1...
- Page 4 Fleet-Recorder Scrubmaster B75 R Installing the Fleet-Recorder Scrubmaster B75 R Caution Prior to installation, place the machine on a level surface, se- cure it against rolling away and disconnect the battery plug! Make all the electrical connec- tions according to the circuit diagram of the respective machine variant.
- Page 5 4. Route the cable in a protective tube along the seat contact switch cable into the electronics compartment (Fig. 3/3). 5. Attach the Fleet-Recorder (Fig. 3/4) to the holder using an O-ring (Fig. 3/5). 6. Connect the antenna cable to the GPS and the GSM connections of the Fleet-Recorder (Fig.
- Page 6 Fleet-Recorder Scrubmaster B75 R 1.2.3 Installing the buzzer The connection lines of the View A buzzer are sensitive to tension stress! Use cable ties at a distance of > 50 mm to the buzzer. Run the antenna cable (Fig. 4/1) in a loop and fix it together with the P20 buzzer (Fig.
- Page 7 W77 cable loom using cable ties (Fig. 5/4). Putting into service The machine specific settings for putting the Fleet-Recorder into service are carried out by the technical customer service. Fig. 5...
- Page 8 Fleet-Recorder Scrubmaster B75 R Schematic diagram of the W77 cable loom (Scrubmaster B75 R) X102 A1/X3 A20/X1 X41/B6...
- Page 9 Fleet-Recorder Scrubmaster B115 R Fleet-Recorder Scrubmaster B115 R Parts list 1 Fleet-Recorder 2 I-Button-Reader 3 User key 4 Antenna 5 Buzzer 6 Label 7 Plate 8 Holder Parts not displayed: 1x W77 cable loom 1x W78 cable loom 1x W79 cable loom...
- Page 10 Fleet-Recorder Scrubmaster B115 R Installing the Fleet-Recorder B115 R Caution Prior to installation, place the machine on a level surface, se- cure it against rolling away and disconnect the battery plug! Make all the electrical connec- tions according to the circuit diagram of the respective machine variant.
- Page 11 Fleet-Recorder Scrubmaster B115 R 8. Position the RFID lock sticker under- neath the I-Button-Reader (Fig. 7/4). 2.2.2 Routing the W78 cable loom 1. Disassemble the hood of the steering column (Fig. 8/1) and the brake pedal (Fig. 8/2). 2. Route the W78 cable loom (Fig. 8/3)
- Page 12 Fleet-Recorder Scrubmaster B115 R 2.2.3 Installing the antenna Prior to installing the antenna, remove the batteries. Caution Only use suitable lifting equipment to remove/insert batteries! 1. Install the plate at the rear wall of the seat shell using two sheet-metal screws according to the sketch (Fig.
- Page 13 1. Attach the holder for the Fleet-Recorder in the electronics compartment using the available screws and washers (Fig. 10/1). 2. Fix the Fleet-Recorder to the holder using the O-ring (Fig. 10/2). 3. Connect the antenna cable to the GPS and the GSM connections of the Fleet-Recorder (Fig.
- Page 14 Fleet-Recorder Scrubmaster B115 R 2.2.5 Connections of the W79 cable loom 1. Connections for the variant with on-board charger and relay K01: - Connect XK01/A1 to the second connection of K01/A1 (Fig. 11/1). - X102 is not connected. - Ring cable lug of connection K01/K1 (Fig.
- Page 15 2. Connect the plug of the P20 buzzer to the plug of the W77 cable loom. 3. Connect the plug A20/X1 of the Fleet-Recorder to the 12-pole plug of the W77 cable loom (Fig. 12/2). 4. Connect the 4-pole plug X78 of the W77 cable loom to the plug of the W78 cable loom.
- Page 16 (Fig. 13/1). 7. Connect the plug connector X107 to X1 of the charger G02 (Fig. 13/2). Putting into service The machine specific settings for putting the Fleet-Recorder into service are carried out by the technical custom- er service. Fig. 13...
- Page 17 Fleet-Recorder Scrubmaster B115 R Schematic diagram of the W77 cable loom (Scrubmaster B115 R) XK01A1 A01/X3 X102 X106 A20/X1 X107 X41/B6...
- Page 18 Advanced Technology for a Cleaner, Better Environment · · Hako GmbH Hamburger Str. 209-239 D-23843 Bad Oldesloe · Fon +49 4531 806-0 Fax +49 4531 806-338...