Electrical Safety; Maintenance - Bosch GAM 270 MFL Operating/Safety Instructions Manual

Safety Rules for Anglefinders
When using the angle information provided by this tool
to cut materials, always observe all of your saw's instruc-
tions, including those for positioning and clamping the
workpiece. In some cases, it may not be possible to set
the required angles on a particular saw or type of saw,
and an alternative means of performing the cut will need
to be used.
For extremely acute (sharp) angles, it may be necessary
to make the cut using a taper jig with a table saw or cir-
cular saw.

Electrical safety

Batteries can explode or leak, cause injury or fire. To re-
duce this risk, always follow all instructions and warn-
ings on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them
at the same time with new batteries of the same brand
and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Remove batteries if the device will not be used for sev-
eral months.

Maintenance

DO NOT disassemble the anglefinder/digital level. There
are no user serviceable parts inside. Disassembling the
anglefinder/digital level will void all warranties on the
product. Do not modify the product in any way. Modify-
ing the anglefinder/digital level may result in hazardous
laser radiation exposure.
DO NOT use this anglefinder/digital level for any pur-
pose other than those outlined in this manual. This
could result in serious injury.
ALWAYS use only the accessories that are recommend-
ed by the manufacturer of your anglefinder/digital level.
Use of accessories that have been designed for use with
other anglefinder/digital levels could result in serious in-
jury.
Repair and servicing must always be performed by a
qualified repair facility. Repairs performed by unquali-
fied personnel could result in serious injury.
1.800.561.8187 information@itm.com
www. .com
8