Brewing Coffee Later (Brew Later); Cleaning And Maintaining Your Coffeemaker - Mr. Coffee EHXSS Series User Manual

Caution: The shower head cover is hot after brewing.
Always allow the coffeemaker to cool down before cleaning.
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the Freshness Timer
feature. To turn the coffeemaker off, press the
SELECT/OFF button all lights will turn off.
5. Make sure the carafe is empty before starting to
brew coffee.
6. Be sure to turn your coffeemaker off when no
longer using it.
The Freshness Timer Feature
The Freshness Timer feature lets you know
how long your coffee has been waiting
for you. At the start of the brew cycle, the
Freshness Timer feature will automatically be
activated.
Press the Freshness Timer TIMER button
once (Figure 8) and the clock time will
change to show the amount of time that has passed
since brewing completed. Push again to display current
time.
NOTE: The BREW NOW green light must be on for the
Freshness Timer feature to operate. The time and delay
brew later time cannot be set when the freshness timer
is displayed.
BREWING COFFEE LATER
1. You must first set the time for when you would like
the coffeemaker to begin brewing your coffee as
described in "Setting the Clock and the Brew Later
Timer" section.
16
2. Prepare your coffeemaker as described in "Adding
Water and Ground Coffee" section.
3. To activate Brew Later and program
your coffeemaker to brew coffee at
a later time, press the SELECT button
twice (Figure 9). The Brew Later light will
turn on. The coffeemaker is now set to
automatically brew coffee at the pre-set
later time. At this time the REGULAR light
will turn on. You can select the strength
that you desire by pressing the BREW STRENGTH
button. (Amber for STRONG, green for REGULAR)
4. At the pre-set time, the green BREW NOW light will
turn on and the Brew Later Amber light will turn off,
indicating the brewing has started in the selected
brew strength. The Freshness Timer feature will start.
5. The coffeemaker warmer plate will keep your coffee
Figure 8
hot for 2 hours and then automatically turn off.
As a safety feature, your coffeemaker will NOT start
again automatically the next day. If you want your
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set Brew
Later, by repeating Steps 2 and 3 above.
To cancel Brew Later: Press the SELECT button three
times until all lights turn off (Figure 9).

CLEANING AND MAINTAINING YOUR COFFEEMAKER

Daily Cleaning
Always unplug the coffeemaker and allow to cool
before cleaning.
Remove the filter basket, permanent filter (not
Figure 9
17