Advertisement
prsncln ENv05.qxd 4/29/04 10:36 AM Page 4
Installation Instructions
To insert batteries:
Remove battery cover completely from
back of dispenser and insert batteries
as illustrated. Replace battery cover.
NOTE: Use alkaline batteries only.
Do not use lithium batteries.
To assemble:
1. Align metal hanger with side
notches on back of dispenser.
Firmly push bottom of hanger into
notch. You will hear or feel a click.
2. Turn dispenser so that blue button
faces you. Place hook up over
shower pipe.
Side
Notches
Top
View
Side
Notches
4
3. Push top of hanger flush against
the shower wall.
4. Snap anti-slip ring over shower
pipe in front of hanger.
To insert bottle:
Turn bottle upside down and gently
insert it into dispenser with label fac-
ing away from you. Firmly press bottle
down into dispenser. You should feel
a "pop."
How to Use Your Automatic Shower Cleaner
For best results: Start with a clean tub/shower. The
Automatic Shower Cleaner is designed to combine with the
water on your shower walls and tub to prevent the build-up of
soap scum, hard water spots, and mold & mildew stains.
To Use:
1. Use immediately after last shower of the day while shower
is still wet.
2. To activate, press activation button. Dispenser will beep for
15 seconds before starting. You can stop dispense cycle
by pressing button again (you will hear two beeps.)
Side
View
POP
5
Advertisement
