Loudspeaker; Switching The Loudspeaker On/Off; Adjusting The Volume; Radio Componenets (Wireless Lan) - Siemens FUJITSU AMILO Li Series Getting Started

Preparation for use and operation

Loudspeaker

Loudspeaker
Your notebook has two built-in stereo speakers.
When you connect headphones or external speakers, the built-in speakers are disabled.

Switching the loudspeaker on/off

► Use the key combination

Adjusting the volume

► Set the desired volume using the key combination
or
► Double-click on the speaker symbol in the taskbar and then on Mixer.
or
► Select Start symbol – (Settings) – Control Panel – Hardware and Sound
– Sound: Adjust system volume.
► Use the slide control to change the volume.
Volume
► To turn the speaker on or off, double-click on the speaker symbol in the taskbar.

Radio componenets (Wireless LAN)

The installation of a wireless LAN module not approved by Fujitsu Siemens
Computers GmbH voids the permits (CE marking) issued for this device.
WirelessLAN
Wireless LAN is integrated in your notebook.

Switching wireless LAN module on and off

Check whether the wireless LAN module is activated/deactivated in
the installed wireless LAN software.
WirelessLAN: WirelessLAN:
► Use the keyboard shortcut
The wireless LAN indicator lights up when the wireless LAN module is switched on.
Pay attention to the additional safety notes for devices with radio
components provided in the "Safety" manual.
Further information on using wireless LAN can be found in the help
files (see
10 - English
Fn + F3
+
Fn F1
"Information sources", Page
to switch the loudspeaker on/off.
+
Fn
to switch the wireless LAN module on and off.
3).
or + .
F4 Fn F5
10600900852, edition 1