Page 1
OPERATION INSTRUCTIONS ALFA 500 Once the appliance is connected to the power the led No 1 turns on. After 30 sec of no use the appliance turns into SLEEP MODE and the led 1, 2,3 start running sequentially.
Page 2
Select the washing cycle you want between 1min (led No 4), 2min (led No 5) and 3min (led No 6) using the set button C. Push the start button B to start the washing cycle. Att. At the hood type models the washing cycle starts by closing the hood.
Page 3
In order to ensure the perfect performance, the machine must be completely cleaned at the end of every working day. Clean the tank thoroughly using specific detergents and remove any dirt from inside. Remove the tank’s filter and clean it under running water without soap. ...
Page 4
technical assistant. Led 1 flashes 6 times every 3 sec Shut down the appliance and call technical assistant. Led 1 flashes 7 times every 3 sec The appliance cannot drain the water. Check if you have removed the overflow pipe or if the drain hose is strangled. Led 1 flashes 8 times every 3 sec Check if the water level into the tank is low and call technical assistant.