Page 2
LYNNE BED PARTS INCLUDED Headboard Side Rail Footboard Cross Support Slat DESCRIPTION Threaded Rods 9 pieces Curved Washers 9 pieces Look Washers 9 pieces Nuts 9pieces Spanner Wrench 1 pieces Screws 12 pieces The Hardware is packed with the Headboard (A) TOOLS NEEDED: Phillips Screwdriver (not included) ASSEMBLY INSTRUCTIONS...
Page 3
LYNNE BED STEP 2 1, Place the Cross Support Slat (D) on the inside of the side rails (B). Screw the ends of the slats to the cleats using Screw (1), as shown in Diagram II. Thank you for your purchase...
Need help?
Do you have a question about the LYNNE 165033 and is the answer not in the manual?
Questions and answers