Garland ROLL&COMB 302EUS-V21 Instruction Manual page 5

Table of Contents

Advertisement

Available languages

Available languages

machine that cannot be controlled by the
electric switch is dangerous and must be
repaired.
Always disconnect the machine before carrying
out any work on the machine. Only manipulate
the machine when disconnected.
2.5. USAGE AND CARE OF THIS MACHINE
Use this machine only to rake artificial grass.
Do not use this machine for other uses. The
use of this machine for other uses for which it
has not been designed could cause dangerous
situations.
Use this machine, accessories and all its parts
according to the instruction manual and taking
into account working conditions and working
area. The use of this machine for jobs different
to those specified in the instruction manual can
cause dangerous situations.
The manufacturer will not be in any case held
responsible for damages caused through an
inadequate or incorrect usage of this machine.
Do not overload the machine. Use the machine
for the work it has been designed for. The
correct machine usage will allow you to work
better and in a more secure way.
Do not run with the comber. Walk at the correct
speed that will allow the machine to do its job.
Do not use this machine if the ¨open¨ and
¨closed¨ switch does not work. Any electric
machine that cannot be controlled by the electric
switch is dangerous and must be repaired.
Look after the machine. Check that all moving
parts are well aligned and that they are not
blocked, that there are no broken pieces or
other conditions that could affect the proper
functioning of the machine. If this machine
is damaged, always repair it before using it
again. Most accidents occur because of poor
maintenance.
Maintain the moving elements clean. The
moving elements if clean will comber better, do
a better job, have less chance of getting tangled
and easier to control.
Turn off and disconnect the machine from the
mains before carrying out any maintenance work
such as adjustments, cleaning, transportation
(even if you are just moving the machine from
one working area to another however close
by this might be), elevating the machine,
maintenance or storage of the machine. These
simple security measures reduce the risk of
accidental start up.
Do not incline the machine with the engine
running.
2.6. MAINTENANCE
Take your machine for periodic revision to a
qualified after sales dealer and only use original
spare parts and accessories. This will guarantee
that the security measures of this electric
machine can always be complied with.
3. WARNING ICONS
The warning icons on the labels that are
attached to this machine and/or in the manual
give necessary information which is necessary
for a correct usage of this machine.
Attention, danger!.
Read carefully this manual before start
up.
Attention! Danger of material ejection.
Be careful with materials that could be
ejected.
People who are not adequately
protected should stay well clear and
beyond the security distance.
Always use eye goggles or protecting
mask and ear protectors.
Do not use this machine in humid
conditions or if it is raining.
5/52
English

Advertisement

Chapters

Table of Contents
loading

Table of Contents