Blodgett Saffire B12C-B Owner's Manual
  1. Manuals
  2. Brands
  3. Blodgett Manuals
  4. Ranges
  5. Saffire B12C-B
  6. Owner's manual
Blodgett Saffire B12C-B Owner's Manual

Blodgett Saffire B12C-B Owner's Manual

Saffire series sectional range, flush 35k/45k-open-burner, step-up 35k-open-burner, charbroiler, standard griddle, thermostatic griddle, hot-top, graduated hot-top models
Hide thumbs Also See for Saffire B12C-B:
Table of Contents

Advertisement

Quick Links

Owner's Manual
Saffire Series Sectional Range
Flush 35K-Open-Burner Models: B12N-B, B12C-B, B24N-BB, B24C-BB, B36N-BBB, B36C-BBB, B36D-BBB, & B36A-BBB
Step-Up 35K-Open-Burner Models: B24N-BB-SU, B24C-BB-SU, B36N-BBB-SU, B36C-BBB-SU, B36D-BBB-SU, & B36A-BBB-SU
Charbroiler Models: B24N-CC, B24C-CC, B36N-CCC, B36C-CCC, B36D-CCC, B36A-CCC, B48N-CCCC, B48D-CCCC, & B48A-CCCC
Standard Griddle Models: B12N-G, B12C-G, B24N-GG, B24C-GG, B36N-GGG, B36C-GGG, B36D-GGG, B36A-GGG, B48N-GGGG, B48D-GGGG, & B48A-GGGG
Thermostatic Griddle Models: B24N-TT, B24C-TT, B36N-TTT, B36C-TTT, B36D-TTT, B36A-TTT, B48N-TTTT, B48D-TTTT, & B48A-TTTT
Hot-Top Models: B12N-H, B12C-H, B24N-HH, B24C-HH, B36N-HHH, B36C-HHH, B36D-HHH, & B36A-HHH
Model B36A-BBB
Model B36A-TTT
Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death.
Read installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526 USA • www.blodgettrange.com
M
1184743
ANUAL
$18.00
45K-Open-Burner Models: B36N-XX, B36C-XX, B36D-XX, & B36A-XX
Graduated Hot-Top Models: B36N-GRAD, B36C-GRAD, B36D-GRAD, & B36A-GRAD
Model B36A-BBB-SU
Model B36A-HHH
WARNING
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain
this manual for the life of the equipment:
Model #: __________________________
Serial #: __________________________
Date Purchased: ___________________
Model B36A-CCC
Model B36A-GRAD
S
S
S
AFFIRE
ERIES
ECTIONAL
M
S
ANUAL
ECTION
R
ANGE
SR

Advertisement

Table of Contents
loading

Related Manuals for Blodgett Saffire B12C-B

Summary of Contents for Blodgett Saffire B12C-B

  • Page 1 Owner’s Manual Saffire Series Sectional Range Flush 35K-Open-Burner Models: B12N-B, B12C-B, B24N-BB, B24C-BB, B36N-BBB, B36C-BBB, B36D-BBB, & B36A-BBB 45K-Open-Burner Models: B36N-XX, B36C-XX, B36D-XX, & B36A-XX Step-Up 35K-Open-Burner Models: B24N-BB-SU, B24C-BB-SU, B36N-BBB-SU, B36C-BBB-SU, B36D-BBB-SU, & B36A-BBB-SU Charbroiler Models: B24N-CC, B24C-CC, B36N-CCC, B36C-CCC, B36D-CCC, B36A-CCC, B48N-CCCC, B48D-CCCC, & B48A-CCCC Standard Griddle Models: B12N-G, B12C-G, B24N-GG, B24C-GG, B36N-GGG, B36C-GGG, B36D-GGG, B36A-GGG, B48N-GGGG, B48D-GGGG, &...

  • Page 2: Safety Precautions

    Blodgett Range replacement parts are installed. Give this Owner’s Manual and important papers to the proper authority to retain for future reference. Copyright © 2002 by Blodgett Range. All rights reserved. Published in the United States of America. WARNING FIRE HAZARD...
  • Page 3 Congratulations! You have purchased one of the finest pieces of heavy-duty commercial cooking equipment on the market. You will find that your new equipment, like all Blodgett Range equipment, has been designed and manufactured to meet the toughest standards in the industry. Each piece of Blodgett Range equipment is carefully engineered and designs are verified through laboratory tests and field installations.

  • Page 4: Specifications

    Therefore, installations should comply with all local codes. Blodgett Range reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, additions, or replacements for previously purchased equipment.
  • Page 5 AFFIRE ERIES ECTIONAL ANGE ENTILATION Improper ventilation can result in personal injury or death. Ventilation which fails to properly remove flue products can cause headaches, drowsiness, nausea, or could result in death. All gas appliances must be installed in such a manner that the flow of combustion and ventilation air is not obstructed.
  • Page 6 PECIFICATIONS Figure 2 Dimensions Front Gas Manifold 33-3/4" (859) 15-3/4" (400) 35-3/4" 24" (908) (610) 7" (178) 2" (51) 12" (305) 36" Flue Riser 24" Flue Riser 5" Flue Riser 72" (1829) 60" (1524) 41" 36" (1041) (914) Optional Rear Gas Connection 6"...
  • Page 7 AFFIRE ERIES ECTIONAL ANGE TILITY EQUIREMENTS AND Model Width Base Type B12C-B 12" cabinet B12C-G 12" cabinet B12C-H 12" cabinet B12N-B 12" modular B12N-G 12" modular B12N-H 12" modular B24C-BB 24" cabinet B24C-BB-SU 24" cabinet B24C-CC 24" cabinet B24C-GG 24"...
  • Page 8 PECIFICATIONS AFFIRE ERIES ECTIONAL ANGE LECTRICITY UPPLY Units with a standard-oven base or a convection-oven base require electric power (50Hz or 60Hz single-phase AC). 120V models have a 7-foot (2134 mm) power cord with a grounded plug. 208/240V models have a terminal block for connection to a single-phase 208/240V source.

  • Page 9: Operation

    AFFIRE ERIES ECTIONAL ANGE PERATION In the event a gas odor is detected, shut down equipment at the main shut off valve. Immediately call the emergency phone number of your gas supplier. If a pilot flame pilot should go out, the flow of gas to the corresponding burner is NOT interrupted. Consequently, it is the responsibility of the operator to check the ignition of each burner immediately EVERY TIME a burner is turned on.
  • Page 10 PERATION Figure 3 Operation of Open-Burner Sections Each 12"-wide section has two control knobs. The left knob controls the rear burner, while the right knob controls the front burner. Each knob can be turned to OFF or to any position in the range from LOW to HIGH. To start cooking, turn the appropriate control knob to HIGH.
  • Page 11 AFFIRE ERIES ECTIONAL ANGE Figure 4 Operation of Uniform Hot-Top Section Each 12" section has one control knob, which can be turned to OFF or to any position in the range from LOW to HIGH. When the control is set to HIGH, the hot top surface will heat to about 700°F (370°C).
  • Page 12 PERATION Figure 5 Operation of Graduated Hot-Top Section Each 36"-wide section has one control knob, which can be turned to OFF or to any position in the range from LOW to HIGH. When the control is set to HIGH, the round center section will heat to about 725°F (385°C), the ring-shaped section will heat to about 625°F (330°C), and the outer areas will heat to about 500°F (260°C).
  • Page 13 AFFIRE ERIES ECTIONAL ANGE Figure 6 Operation of Charbroiler Section Each 12" section has one control knob, which can be turned to OFF, HIGH, or LOW. Each 6"-wide burner top-grate can be turned over to provide either wide branding marks, or narrower branding marks with channels to carry away drippings (and so reduce flare up).
  • Page 14 PERATION Figure 7 Operation of Standard (Non-Thermostatic) Griddle Sections Each 12"-wide section has one control knob, which can be turned to OFF, HIGH, or LOW. To start cooking, turn the appropriate control knob to HIGH. Check that the burner ignites. The gas does NOT automatically shut off if the burner does not ignite! If the burner does not ignite, check and/or light the pilots (see procedure at right).
  • Page 15 AFFIRE ERIES ECTIONAL ANGE Figure 8 Operation of Thermostatic Griddle Sections Each 12"-wide section has one control knob that can be turned to OFF, or to any temperature in the range 150°F to 400°F (66°C to 204°C). To start cooking, turn on the appropriate control knob. Check that the burner ignites.
  • Page 16 PERATION Figure 9 Operation of Oven Each oven has a thermostatic control that can be set in the range 150°F to 500°F (66°C to 260°C). Convection ovens have a fan that can be set to either HI speed or LO speed. For advice on using a convection oven, see the information on the following two pages of this manual.

  • Page 17: Suggestions For Cooking

    AFFIRE ERIES ECTIONAL ANGE UGGESTIONS FOR OOKING As a guide, set oven temperatures 25 to 50 degrees lower than called for in recipes using conventional (non- convection) ovens. FROZEN ENTREE PRODUCTS: Punch holes in lid before heating. Tent lid if product has a tendency to stick, i.e., lasagna or macaroni and cheese.
  • Page 18 PERATION ORRECTING ROBLEMS WHEN If… Cakes are dark on the sides and not done in the center… Cake edges are too brown… Cakes have light outer color… Cake settles slightly in the center… Pies have uneven color… Meats are browned and not done in center… Meats are well done and not browned…...

  • Page 19: Daily Cleaning And Maintenance

    Blodgett Range appliances are sturdily constructed of the best materials and are designed to provide durable service when treated with ordinary care. To expect the best performance, your equipment must be maintained in good condition and cleaned daily.
  • Page 20 & M LEANING AINTENANCE WOOL as any particles left on the surface will rust and further spoil the appearance of the finish. NEVER USE A WIRE BRUSH, STEEL SCOURING PADS (EXCEPT STAINLESS), SCRAPER, FILE OR OTHER STEEL TOOLS. Surfaces which are marred collect dirt more rapidly and become more difficult to clean. Marring also increases the possibility of corrosive attack.

  • Page 21: Installation

    1/2 psi (3.45 kPa). This installation procedure does NOT cover Blodgett Range sectional fryers, fryer filter systems, salamander broilers, upright broilers, cheese melters, or refrigerated bases. Consult the manuals of those appliances when they are being installed as part of a sectional range battery.

  • Page 22: Installation Of Legs

    NSTALLATION Figure 10 Removal of Shipping Hold-Down Brackets TTACH EGS TO THE A set of four legs is packed with units ordered with legs. (For units ordered with casters, go to Step 2b.) A threaded leg pad is fastened to the base frame at each corner. Each leg has a corresponding mating thread. The legs can be adjusted to overcome a slightly uneven floor.
  • Page 23 AFFIRE ERIES ECTIONAL ANGE TTACH ASTERS TO THE For an appliance equipped with casters, (1) the installation shall be made with a connector that complies with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69 or Connectors for Moveable Gas Appliances, CAN/CGA-6.16, and a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI Z21.41, or Quick Disconnect Devices for Use with Gas Fuel, CAN1-6.9, (2) adequate means must be provided to limit the movement of the appliance without depending on the connector and the...
  • Page 24 NSTALLATION OUNT ANGE ON For an appliance equipped with casters, (1) the installation shall be made with a connector that complies with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69 or Connectors for Moveable Gas Appliances, CAN/CGA-6.16, and a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI Z21.41, or Quick Disconnect Devices for Use with Gas Fuel, CAN1-6.9, (2) adequate means must be provided to limit the movement of the appliance without depending on the connector and the quick-disconnect device or its associated piping to limit the appliance movement and (3) the restraining means...
  • Page 25 AFFIRE ERIES ECTIONAL ANGE Adequate means must be provided to limit the movement of the appliance without depending on the connector and the quick-disconnect device or its associated piping to limit the appliance movement. The restraining means should be attached to a frame member on the back of the unit. Figure 13 Installation of Cable Restraint 4: C...
  • Page 26 NSTALLATION 5: A TTACH ISER AND Install the flue riser(s) using the following procedure (as shown in Figure 14). 1. Attach any salamander broilers and flue-riser-mounted cheese melters to appropriate sections following the installation procedure in the manuals for those options. Figure 14 Installation of Flue Riser HELF...

  • Page 27: Step 7: Connect Gas Supply

    If the sectional range is being installed at over 2,000 feet altitude and that information was not specified when ordered, contact the appropriate authorized Blodgett Range Service Representative or the Blodgett Range Service Department. Failure to install with proper orifice sizing will result in poor performance and may void the warranty.

  • Page 28: Step 8: Connect Water Supply

    NSTALLATION ALL PIPE JOINTS AND CONNECTIONS MUST BE TESTED THOROUGHLY FOR GAS LEAKS. USE ONLY SOAPY WATER FOR TESTING ON ALL GASES. NEVER USE AN OPEN FLAME TO CHECK FOR GAS LEAKS. ALL CONNECTIONS MUST BE CHECKED FOR LEAKS AFTER THE APPLIANCE HAS BEEN PUT INTO OPERATION.

  • Page 29: Trim Panels

    AFFIRE ERIES ECTIONAL ANGE 4. Light all pilots (see the appropriate Operation section elsewhere in this manual). Start with the section(s) furthest from the gas supply connection(s) to purge air from the gas lines. Check all pilots for correct flame height. 5.
  • Page 30 (countertop) models, the serial plate is located inside the front valve panel. Replacement parts (including parts not listed in this manual) may be ordered either through a Blodgett Range Authorized Parts Distributor or a Blodgett Range Authorized Service Agency.
  • Page 31 AFFIRE ERIES ECTIONAL ANGE ROUBLESHOOTING URNERS AND The following table lists the possible causes of burner and pilot related problems that may occur. Problem None of the burners and pilots will turn on All burners produce excessive carbon deposits Only some burners produce excessive carbon deposits Only some pilots produce excessive carbon deposits Top burner (not oven) will not come on Top section pilot will not remain lit...
  • Page 32 ERVICE Figure 15 Adjustment of Charbroiler, Standard-Griddle, and Uniform Hot-Top Burners and Pilots The burner valves are not adjustable. The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.
  • Page 33 AFFIRE ERIES ECTIONAL ANGE ERVICE Figure 16 Adjustment of Graduated Hot-Top Pilot and Burner The burner valves are not adjustable. The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.
  • Page 34 ERVICE Figure 17 Adjustment of 35K and 45K Open-Top Burners and Pilots The burner valves are not adjustable. The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.
  • Page 35 AFFIRE ERIES ECTIONAL ANGE Figure 18 Adjustment of Thermostatic-Griddle Thermostat Each 12"-wide section of a thermostatic griddle has a control knob that operates a snap-action thermostatic valve. Each valve is adjusted at the factory. If the griddle surface temperature is different from the thermostat dial setting, adjust the thermostatic valve using the following procedure: 1.
  • Page 36 ERVICE Figure 19 Adjustment of Thermostatic-Griddle Burners and Pilot The thermostatic burner valve is adjustable (see page 35). The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.

  • Page 37: Troubleshooting

    AFFIRE ERIES ECTIONAL ANGE ROUBLESHOOTING Proper and efficient operation of oven is dependent on correct installation and function of components. Always verify that components are in place and functioning as intended. The following table lists the possible causes of oven-related problems that may occur. Problem Oven will not come on.
  • Page 38 ERVICE REMOVE THE MAIN POWER SOURCE. UNPLUG OR DISCONNECT CIRCUIT BREAKER. Check all wiring for loose connections or breaks. Go to the junction box on the back of the range and remove the cover. Place a DVM or ammeter on the black wire #1.
  • Page 39 AFFIRE ERIES ECTIONAL ANGE Figure 20 Adjustment of Oven Thermostat The oven thermostat is carefully calibrated at the factory so that the dial setting matches the actual oven temperature. Field recalibration is seldom necessary, and should not be resorted to unless considerable cooking experience definitely proves that the control is not maintaining the temperatures to which the dial is set.
  • Page 40 DJUSTMENT OF ANIFOLD There is not an internal pressure regulator. The external pressure regulators supplied by Blodgett Range are factory set at 6" W.C. for natural gas and 10" W.C. for propane gas. To check the manifold pressure, do the following: 1.
  • Page 41 AFFIRE ERIES ECTIONAL ANGE ERVICE Figure 22 Wiring Diagram for 120 Volt Oven Bases 1184743 WNER ANUAL...

  • Page 42: Front-Rail Parts

    ERVICE ARTS The following tables and figures list serviceable parts. For parts not listed, contact a Blodgett Range Authorized Parts Distributor or a Blodgett Range Authorized Service Agency. Index of Parts Diagrams Page Number Description Front-Rail Parts Leg and Caster Parts...

  • Page 43: Leg And Caster Parts

    AFFIRE ERIES ECTIONAL ANGE Figure 24 Leg and Caster Parts Part Number Description 1172650 LEG PAD (3/4 X 10 HOLE) 1146500 1/4 LOCK WASHER 1146201 1/4 X 30 X 3/4 HEX HEAD 1174260 LEG PACKAGE (set of four legs, not including bolts, leg pads, or lock washers) 1174262 EARTHQUAKE LEGS SS (set of four) 1174265...

  • Page 44: Open-Burner External And Structural Parts

    ERVICE 35K-Open-Burner External and Structural Parts See drawing on following page. Quantity* Part Number Description 12" 24" 36" 1183978 TRAY ASSEMBLY, 12" CRUMB 1183974 TRAY ASSEMBLY, 24" CRUMB 1183972 TRAY ASSEMBLY, 36" CRUMB 1184689 KNOB 1184729 VALVE PANEL, 12C-B (cabinet base) 1184730 VALVE PANEL, 12N-B (modular-countertop base) 1184727...
  • Page 45 AFFIRE ERIES ECTIONAL ANGE Figure 25 35K-Open-Burner External and Structural Parts See parts list on previous page. Flush 35K-Open-Burner Models WNER ANUAL 36"-Wide Models Shown 1184743 ERVICE Step-Up 35K-Open- Burner Models...

  • Page 46: Open-Burner Gas Train Parts

    VALVE, HI-OFF, NAT/LP 1179188 EXTENSION, ORIFICE 1008737 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1008752 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1182193...
  • Page 47 AFFIRE ERIES ECTIONAL ANGE Figure 26 35K-Open-Burner Gas Train Parts See parts list on previous page. Flush 35K-Open-Burner Models 36"-Wide Models Shown WNER ANUAL 1184743 ERVICE Step-Up 35K-Open-Burner Models...

  • Page 48: Open-Burner Parts

    1178202 VALVE, HI-OFF, NAT/LP 1008735 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1008750 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1179240...
  • Page 49 AFFIRE ERIES ECTIONAL ANGE Figure 27 45K-Open-Burner Parts See parts list on previous page. WNER ANUAL 1184743 ERVICE...

  • Page 50: Charbroiler External And Structural Parts

    ERVICE Charbroiler External and Structural Parts See drawing on following page. Quantity* Part Number Description 24" 36" 48" 1184689 KNOB 1184519 VALVE PANEL, 24C-CC, SS 1184521 VALVE PANEL, 24N-CC, SS 1183641 VALVE PANEL, 36A/D-CCC, SS 1183643 VALVE PANEL, 36C-CCC, SS 1183642 VALVE PANEL, 36N-CCC, SS 1185396...
  • Page 51 AFFIRE ERIES ECTIONAL ANGE ERVICE Figure 28 Charbroiler External and Structural Parts See parts list on previous page. 1184743 WNER ANUAL...

  • Page 52: Charbroiler And Standard-Griddle Gas Train Parts

    TUBE, 3/8" X 9" FLEXIBLE MANIFOLD, DUAL BURNER ORIFICE ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) BURNER ASSEMBLY, CHARBROILER FITTING, DOUBLE PILOT, 3/16"...

  • Page 53: Gas Connection Parts

    AFFIRE ERIES ECTIONAL ANGE Figure 30 Gas Connection Parts Part Number Description 1147005 1" PIPE CAP 1146905 1" 90 DEGREE ELBOW 1163489 REAR GAS STUB 1184777 STRAP, 1-1/4" PIPE 1146808 1" PIPE NIPPLE 1174747 TAIL PIPE 1146911 ELBOW, ST., BLK, 1" 90 DEGREE 4450009 PRESSURE REGULATOR 1-1/4"...

  • Page 54: Griddle External And Structural Parts

    ERVICE Griddle External and Structural Parts See drawing on following page. Quantity* Part Number 12" 24" 36" 48" 1184689 1073497 1184653 1184657 1184651 1184518 1174655 1184516 1184601 1183963 1184602 1183962 1184600 1183961 1185380 1185393 1185385 1185393 1185386 1185395 1183696 1183691 1184773 1183897 1183896...
  • Page 55 AFFIRE ERIES ECTIONAL ANGE Figure 31 Griddle External and Structural Parts See parts list on previous page. WNER ANUAL 1184743 ERVICE...

  • Page 56: Thermostatic Griddle Gas Train Parts

    1183680 MANIFOLD, DUAL BURNER ORIFICE 1008748 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1008756 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size)
  • Page 57 AFFIRE ERIES ECTIONAL ANGE ERVICE Figure 32 Thermostatic Griddle Gas Train Parts See parts list on previous page. 1184743 WNER ANUAL...

  • Page 58: Uniform Hot-Top Parts

    TUBE, 3/8" X 9" FLEXIBLE 1008750 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1008756 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size)
  • Page 59 AFFIRE ERIES ECTIONAL ANGE Figure 33 Uniform Hot-Top Parts See parts list on previous page. WNER ANUAL 1184743 ERVICE...

  • Page 60: Graduated-Hot-Top Parts

    1183960 BRACKET, BURNER ORFICE 1006425 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1006443 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1884...
  • Page 61 AFFIRE ERIES ECTIONAL ANGE ERVICE Figure 34 Graduated-Hot-Top Parts See parts list on previous page. 1184743 WNER ANUAL...

  • Page 62: Oven Base Parts

    SOLENOID TO ORIFICE TUBE 1183568 BRACKET, ORIFICE 1008730 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1008748 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Blodgett Range for appropriate orifice size) 1183567...
  • Page 63 AFFIRE ERIES ECTIONAL ANGE Figure 35 Oven Base Parts See parts list on previous page. WNER ANUAL 1184743 ERVICE...

  • Page 64: Convection Oven Blower Parts

    ERVICE Figure 36 Convection Oven Blower Parts Part Number Description 1180834 OVEN BAFFLE CO 1177581 BLOWER WHEEL ASSEMBLY 1177452 MOTOR, 1/3 HP, 115 VOLT 1180821 POCKET W/A, BLOWER, 500 SERIES 1181747 SHIELD, RT BLOWER, 500 SERIES 1181748 SHIELD, LT BLOWER, 500 SERIES 1184703 AIR DIVERTER * Not shown on drawing.

  • Page 65: Modular-Countertop Base Parts

    AFFIRE ERIES ECTIONAL ANGE Figure 37 Modular-Countertop Base Parts Part Number Description 1183863 BASE. 12 COUNTERTOP 1183859 BASE. 24 COUNTERTOP 1183523 BASE. 36 COUNTERTOP 1185418 BASE. 48 COUNTERTOP 1183861 STIFFENER, 12 BASE 1183858 STIFFENER, 24 BASE 1183579 STIFFENER, 36 BASE 1185413 STIFFENER, 48 BASE 1183640...

  • Page 66: Cabinet-Base Parts

    ERVICE Cabinet-Base Parts See drawing on following page. Quantity* Part Number 12" 24" 36" 48" 1184954 1184952 1183598 1184955 1184953 1183599 1183875 1183873 1183600 1183563 1183866 1183864 1183586 1183869 1183867 1183587 1183872 1183870 1183594 1183983 1183984 1183985 1183986 * Quantity of part used may depend on width of section (12", 24", 36" or 48"). ** Not shown on drawing.
  • Page 67 AFFIRE ERIES ECTIONAL ANGE ERVICE Figure 38 Cabinet-Base Parts See parts list on previous page. 1184743 WNER ANUAL...

  • Page 68: Flue Riser Parts

    ERVICE Flue Riser Parts See drawing on following page. For continuous flue risers spanning multiple sections, or sloped enclosures, contact Blodgett Range. Part Number Description 1183617 FLUE BOX ASSEMBLY, 36" (for models with an oven base) 1183526 BRACKET, 36 DEEP LT FLUE RISER...
  • Page 69 AFFIRE ERIES ECTIONAL ANGE Flue Riser Parts (continued) Part Number Description 1183831 SHIELD, 24" X 12" WALL AZ 1184793 SHIELD, 24" X 12" WALL SS 1183833 SHIELD, 24" X 24" WALL AZ 1184794 SHIELD, 24" X 24" WALL SS 1183853 SHIELD, 24"...

  • Page 70: Side Panel And Battery-Assembly Parts

    ERVICE Side Panel and Battery-Assembly Parts Part Number Description 1183547 TRIM, SIDE (if side is not adjacent to another section of a battery) 1183563 TRIM, SIDE (if side is adjacent to an open-burner section of a battery) 1183564 TRIM, SIDE (if side is adjacent to a griddle or charbroiler section of a battery) 1183532 BODY SIDE, 36 SS RT 1183521...
  • Page 71 AFFIRE ERIES ECTIONAL ANGE Notes: 1184743 WNER ANUAL...
  • Page 72 When service is needed, contact a Blodgett Range Authorized Service Agency, or your dealer. To avoid confusion, always refer to the model number, serial number, and type of your appliance.

This manual is also suitable for:

B12c-gSaffire b12n-hSaffire b24c-bbSaffire b12c-hSaffire b24c-bb-suSaffire b12n-b ... Show all

Table of Contents