Aeotec Z-Stick 7 Manual

Z-Stick 7
SKU: AEOEZWA010
Used in this guide.
Artículos utilizados en este manual / Utilisé dans ce guide / In dieser Gebrauchsanweisung
verwendete Bezeichnungen / Usato in questa guida / Gebruikt in deze handleiding / Används
i den här handboken.

Important safety information.

Please read this and the online guide(s) at support.aeotec.com/zs7 carefully. Failure to follow
the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of
the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible
for any loss or damage resulting from not following any instruction in this guide or in other
materials.
Z-Stick 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and / or
wet locations.
What is Z-Wave™?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device
is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way
communication) and every mains powered node can act as a repeater for other nodes (meshed
network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other
certified Z-Wave device regardless of brand and origin as long as both are suited for the
same frequency range.
If a device supports secure communication it will communicate with other devices secure as
long as this device provides the same or a higher level of security. Otherwise it will automatically
turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer
to www.z-wave.info.