Yamaha YFM250X 2002 Supplementary Service Manual page 16

1 Battery breather hose
2 Rear brake cable
3 Spark plug cap
4 Ignition coil
5 Ignition coil lead
6 Starter motor lead
7 Rear brake light switch
8 Rear brake breather hose
CABLE ROUTING
È Make sure that the battery breather hose is not
kinked or bent.
É Route the rear brake cable through the cable
guide on the cylinder.
Ê Fasten the starter motor lead to the frame with
the plastic clamps.
Ë Fasten the battery breather hose to the frame
with the plastic clamps.
Ì 50 ~ 60 mm (2.0 ~ 2.4 in)
– 8 –
SPEC