Obtaining A Map Of The Current Location (Triangulating Priority Mode) - Sony Handycam HDR-CX260V Operating Manual

GPS triangulating status
Searching for the
Triangulating
Triangulating meters
Images will be registered using
the location information that was
previously obtained.
If you do not want to record location
information
 [Setup] 
Select
General Settings]  [GPS
[
Setting]  [Off ].
Notes
It may take a while before the camcorder starts

triangulating.
Use the GPS function outdoors and in open

US

satellites
Number of dots
changes
Unable to
triangulate
Unable to record
location information
areas, as the radio signals can best be received
in such areas.
The map always displays the north at the top.

Obtaining a map of the current
location (triangulating priority
mode)
This feature is useful for checking a map of
your current location while traveling.
As the camcorder turns other functions
off to search for satellites, obtaining
triangulating information can take priority.
 [Setup]
Select
[ General Settings]
Location].
A marker (red) that indicates
your current location
Displays the triangulating
Notes
If you select a certain point on the screen, the

map shows an area with that point at the center.
Select to move your current location back
to the center again.
If the camcorder cannot acquire current

location information, the triangulating
information screen appears (p. 43).
If the location information that was previously

acquired is invalid, the marker does not appear.
To close the current location screen, select

.

 [Your
information (p. 43)