Capturing A Photo From A Movie - Sony Handycam HDR-CX260V Operating Manual

2
Select the point where you want
to divide the movie into scenes
using /
.
A
A: Returns to the beginning of the selected
movie
B: Adjusts the dividing point with more
precision
Notes
A slight difference may occur from the point

where you select and the actual dividing point,
as your camcorder selects the dividing point
based on about half-second increments.
Some basic editing operations can be

done on the camcorder. If you want to do
advanced editing operations, use the built-in
"PlayMemories Home" software.

Capturing a photo from a movie

1
 [Photo Capture] that
Select
appears on the playback screen
of a movie.
US

, and then select
B
2
Select the point where you want
to capture a photo using
and then select
A
A: Returns to the beginning of the selected
movie
B: Adjusts the capturing point with more
precision
If the movie was recorded with one of
the following image quality levels, the
image size will be set as shown below.
High definition image quality (HD): 2.1

M (16:9)
Wide aspect ratio (16:9) with standard

definition image quality (STD): 0.2 M
(16:9)
4:3 aspect ratio with standard definition

image quality (STD): 0.3 M (4:3)
On recording date and time of
captured photos
The recording date and time of captured photos

are the same as the recording date and time of
the movies.
If the movie you are capturing from has no data

code, the recording date and time of the photo
will be the date and time you captured from
the movie.
/ ,
.
B