Bush Hog MS1300P Operator's Manual
  1. Manuals
  2. Brands
  3. Bush Hog Manuals
  4. Spreader
  5. MS1300P
  6. Operator's manual

Bush Hog MS1300P Operator's Manual

Manure spreader
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
BUSH HOG®
MS1300P
Manure Spreader
Rev Apr-2021
Document Number: Z97908
Keep this manual with the machine at all times

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS1300P and is the answer not in the manual?

Questions and answers

Related Manuals for Bush Hog MS1300P

Summary of Contents for Bush Hog MS1300P

  • Page 1 OPERATOR'S MANUAL BUSH HOG® MS1300P Manure Spreader Rev Apr-2021 Document Number: Z97908 Keep this manual with the machine at all times...
  • Page 2 If your manual should become lost or destroyed, Bush Hog will be glad to provide you with a new copy. Order from Bush Hog, 2501 Griffin Ave., Selma, Alabama 36703.

  • Page 3: Table Of Contents

    MS1300P Manure Spreader Table of Contents 1. Warranty ..............4 11.  Specifications.............37 11.1 Machine Specifications ........37 2. Introduction ............5 11.2 Common Bolt Torque Values ......38 2.1 Serial Number Location ........5 11.3 Wheel Lug Nut Torque ........39 2.2 Delivery Inspection Report ........6 2.3 Types of Decals on the Machine ......7 12.

  • Page 4: Warranty

    2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judge- ment of Bush Hog such use affects its performance, stability or reliability.

  • Page 5: Introduction

    It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog dealer from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submit- ted for warranty consideration must be made within forty-five (45) days of failure.

  • Page 6: Delivery Inspection Report

    Manure Spreader 2.2 Delivery Inspection Report Bush Hog MS1300P Manure Spreader This form must be filled out by the dealer at the time of delivery, and then signed by the dealer and customer. I received the product manuals and have been thoroughly...

  • Page 7: Types Of Decals On The Machine

    The following example decal provides additional information for the operator or While you become familiar with your Bush Hog product, notice explains the operation of a control. that there are numerous decals located on the machine. There are different types of decals for safety, information, and product identification.

  • Page 8: Safety

    YOU are responsible for the SAFE operation and maintenance of DANGER – your Bush Hog product. YOU must make sure that anyone who is going to use, maintain, or work around the machine is familiar Indicates an imminently hazardous situation that, if not avoided, with the operating and maintenance procedures and related will result in death or serious injury.

  • Page 9: Safety Rules

    MS1300P Safety Manure Spreader 3.4 Safety Rules • Keep a first-aid kit available for use, should the need arise, and know how to use it. CAUTION! • Keep a fire extinguisher available for use, should Hearing loss hazard. Prolonged the need arise, and know how to use it.

  • Page 10: Safe Condition

    3.7 Safety Training Safety is a primary concern in the design and manufacture of Bush Hog products. Unfortunately, efforts to provide safe equipment can be wiped out by a single careless act. • It is the operator's responsibility to read, understand, and follow ALL safety and operating instructions in this manual.

  • Page 11: Sign-Off Form

    MS1300P Safety Manure Spreader 3.8 Sign-Off Form The design and manufacture of this product conforms to the applicable provisions in the following standards: Everyone who uses this machine must read and thoroughly • ASABE S318 Safety for Agricultural Field Equipment understand all safety, operation, and maintenance information in this manual.

  • Page 12: Safety Sign Explanations

    MS1300P Safety Manure Spreader 3.9 Safety Sign Explanations Practicing good safety means becoming familiar with safety The top panel (or left-hand panel for horizontal signs) shows the signs (decals) and warnings, and being aware of situations that safety alert (potential hazard), and the bottom (or right-hand) require alertness.
  • Page 13 MS1300P Safety Manure Spreader 01503 Fig. 3 – Safety-sign Locations (left-hand side view) 1. WARNING! 2. WARNING! Risk of entanglement in beater-bar Risk of injury from flying debris. paddles. Stay clear of manure discharge. The beater Keep hands, loose clothing, and long hair...
  • Page 14 MS1300P Safety Manure Spreader 3. WARNING! 6. WARNING! Risk of being caught in rotating parts Risk of entanglement in rotating drive resulting in serious injury. line. Do not attempt to reach in with the shields Stay clear of the PTO shaft when the removed while the machine is operating.

  • Page 15: Replacing Damaged Safety Signs

    Replacement safety signs are available from your authorized distributor, dealer parts department, or Bush Hog. • Keep the safety signs clean and legible at all times. • Parts replaced that had a safety sign (decal) on them must also have the safety sign replaced.

  • Page 16: Familiarization

    Familiarization Manure Spreader 4. Familiarization The Bush Hog MS1300P Manure Spreader is designed to hold, 4.2 Operator Orientation transport, and spread manure or other similar material. A set of beater-bar paddles at the back of the main box spread the IMPORTANT! The directions for left-hand side, right-hand manure.

  • Page 17: Machine Components

    The heavy-duty beater bar includes ten replaceable The Bush Hog MS1300P has a 130 bushel main box with a paddles. sliding apron that is powered by a PTO driven multi-speed gear assembly (540 rpm maximum).

  • Page 18: Attaching To A Tractor

    MS1300P Attaching to a Tractor Manure Spreader 5. Attaching to a Tractor 1. Keep bystanders clear of the area. WARNING! 2. Make sure that there is enough space and clearance to Never let anyone stand between the tractor and safely back up to the tractor.

  • Page 19: Pto Shaft

    MS1300P PTO Shaft Manure Spreader 6. PTO Shaft Before installing the PTO shaft, make sure that it is the correct 5. Subtract B from the uncut PTO shaft measurement A. size. (A – B) The result is the length that BOTH halves of the PTO shaft should be shortened.

  • Page 20: Installing A Pto Shaft

    MS1300P PTO Shaft Manure Spreader 6.2 Installing a PTO Shaft Make sure that the equipment is in the following state: • The tractor is turned off and the parking brake is applied. • The PTO shaft shielding is in good condition and able to turn freely, independent of the PTO shaft.

  • Page 21: Controls

    MS1300P Controls Manure Spreader 7. Controls The five-position speed-control indicator is located on the front WARNING! of the main box, near the PTO connection. Do not operate the machine until you are thoroughly familiar with the position and function of the various controls. Read the operator’s manual thoroughly.

  • Page 22: Operating Instructions

    MS1300P Operating Instructions Manure Spreader 8. Operating Instructions The operator is responsible for being familiar with and • Do not allow anyone within 20 ft (6 m) of the manure following all operating and safety procedures. spreader during operation. Objects thrown from the rear of the manure spreader could cause injury.

  • Page 23: Stopping

    MS1300P Operating Instructions Manure Spreader 8.2 Stopping 8.5 Machine Break-In 1. Slow the tractor engine to low idle. Although there are no operational restrictions on the manure spreader when it is used for the first time, it is recommended 2. Stop forward movement.

  • Page 24: Loading

    MS1300P Operating Instructions Manure Spreader 8.6 Loading • Break up any large chunks of manure. • Be cautious of foreign objects in the manure that could The manure spreader load height is 42 inches jam the beater-bar and paddles, and potentially damage (107 cm).

  • Page 25: Spreading

    For more information about accessories for your manure spreader, contact your Bush Hog dealer or go to 1. Stop the tractor, apply the parking brake, and then turn off BushHog.com.

  • Page 26: Transporting

    MS1300P Operating Instructions Manure Spreader 8.10 Transporting 5. Start the tractor and leave it at a low idle. 6. Slowly engage the PTO. IMPORTANT! Equipment that is transported on a public 7. Do one of the following: roadway must comply with the local laws that govern the - If the beater bar turns freely, continue spreading.

  • Page 27: Storage

    MS1300P Operating Instructions Manure Spreader 8.11 Storage IMPORTANT! During cold weather months, never store manure in the manure spreader between unloading times. A frozen load can cause equipment damage. After use for one season or when the manure spreader is not going to be used for a period of time, completely inspect all of the major systems.

  • Page 28: Service And Maintenance

    Check the apron-chain lubrication. See page 31 • When replacement parts are required, only use genuine original equipment manufacturer (OEM) parts. Bush Hog Check the drive-chain lubrication and See page 31 cannot be held responsible for damage or injuries that are tension, and the sprocket condition.
  • Page 29 MS1300P Service and Maintenance Manure Spreader 9.3.1 Grease Points IMPORTANT! Use a hand-held grease gun for all greasing. Pump one shot of grease per fitting. • Wipe the grease fitting with a clean cloth before applying the grease to avoid injecting dirt and grit.
  • Page 30 MS1300P Service and Maintenance Manure Spreader 01459 Fig. 16 – 50-hour Grease Points...

  • Page 31: Drive Chain

    MS1300P Service and Maintenance Manure Spreader 9.4 Drive Chain 9.5 Apron Chain The drive chain and sprocket provide power to the apron-chain Lubricate the apron chain every 50 hours or monthly. Use a drive shaft. It must be oiled frequently and kept at the correct good quality chain lubricant for the best performance.

  • Page 32: Main Box Sealing Flap

    MS1300P Service and Maintenance Manure Spreader 9.6 Main Box Sealing Flap On each side of the manure spreader: 1. Loosen the two idler-mount bolts (1). Periodically check the condition of the front main-box sealing flap. Replace the sealing flap if the sides or bottom of the main 2.

  • Page 33: Gearbox

    MS1300P Service and Maintenance Manure Spreader 9.7 Gearbox 9.7.1 Check the Gearbox Oil Level Check the gearbox oil level every 50 hours. Use a good quality SAE 90 EP (ISO VG 320) gear oil in the gearbox. 1. Set the machine to a safe condition. For instructions, see Safe Condition on page 10.

  • Page 34: Drive Belt

    MS1300P Service and Maintenance Manure Spreader 9.7.3 Adjust the Shift Cable 9.8 Drive Belt If the gearbox is not shifting gears correctly, the shift cable may require adjustment. WARNING! Machine shown with shields removed for illustrative purposes only. Never operate machine with shields removed.

  • Page 35: Beater-Bar Paddles

    For optimal performance, inspect the beater-bar paddles on a Recheck the drive belt tension after 10 hours of use. regular basis and replace paddles that are worn or damaged. Contact your Bush Hog dealer to purchase replacement paddles. 01462 Fig. 24 – Tensioning a Drive Belt 01467 1.

  • Page 36: Troubleshooting

    Bush Hog. Before you call, have The following table provides possible causes and solutions for the serial number for your manure spreader handy. For more some of the common problems you may encounter.

  • Page 37: Specifications

    MS1300P Specifications Manure Spreader 11. Specifications 11.1 Machine Specifications Model MS1300P 45–75 hp Recommended Tractor Size 34–56 kW Drive Type Beater Drive Belt drive / gearbox Apron Drive Chain and sprocket 130 bushels Capacity (Heaped) 162-1/2 ft³ 4.6 m³ 130" x 48" x 23"...

  • Page 38: Common Bolt Torque Values

    MS1300P Specifications Manure Spreader 11.2 Common Bolt Torque Values Imperial Bolt Torque Specifi   cations Checking Bolt Torque Torque Value Bolt SAE Gr. 2 SAE Gr. 5 SAE Gr. 8 Unless otherwise indicated, tighten all bolts to the torque Diameter values that are specified in the following tables. Check the lbf•ft...

  • Page 39: Wheel Lug Nut Torque

    MS1300P Specifications Manure Spreader 11.3 Wheel Lug Nut Torque Wheel Lug Nut Torque It is extremely important safety procedure to apply Wheel Units 1st Stage 2nd Stage 3rd Stage and maintain proper wheel mounting torque on your Size trailer axle. Torque wrenches are the best method to lbf•ft...

  • Page 40: Index

    MS1300P Index Manure Spreader 12. Index Sign-off ................11 Apron chain Lubricate ................ 31 Gearbox Maintenance ............28, 31 Maintenance ............28, 33 Shorten ................32 Oil change..............33 Tension ................31 Oil level ................33 Apron drive Shift cable, adjustment ..........34 Speed control..............
  • Page 41 MS1300P Index Manure Spreader Instructions ..............25 Troubleshooting ............. 36 PPE .................7, 14 Standards ................11 Pre-operation checklist............23 Stopping ................23 PTO ..................14 Stopping in an Emergency ..........23 Controls ................. 21 Storage................27 Machine clean out............25 Maintenance ..............28 Shaft, install ..............
  • Page 44 BUSH HOG®...

Table of Contents