AutomationDirect ProductivityOpen P1AM-100 Quick Manual

P1AM-100 Arduino
Compatible CPU
The P1AM-100 is an Arduino-compatible CPU.
It uses the Atmel SAMD21G18 and can be
programmed in C++ using Arduino IDE. It interfaces
with all P1000 Series I/O modules connected to
the right side and most Arduino MKR form factor
shields connected to the left side.
Toggle switch
- Connected to
SWITCH_BUILTIN or
Digital Pin 31
Arduino MKR shields &
Productivity Open shields
External Power
- 24VDC on bottom
connector
MKR
®
CPU Status Indicators
- PWR LED indicates
power applied
- BASE LED indicates when
base controller is powered
and initialized
- LED controlled by writing to
LED_BUILTIN or Digital Pin 32
USB Micro Interface
- Programming
- Online monitoring
microSD Port
- removable flash memory
P1000 I/O Modules
General Specifications
Operating Temperature
0° to 60°C (32° to 140°F)
Storage Temperature
-20° to 70°C (-4° to 158°F)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Heat Dissipation
4000mW
Enclosure Type
Open Equipment
Productivity1000 I/O modules connect on the right
Module Location
side of module. Power supply, P1AM Shields and MKR
Shields connect on the left side on the module.
Weight
76g (2.8 oz)
UL 61010-1 and UL 61010-2-201 File E139594, Canada
Agency Approvals & USA
CE*
*See CE Declaration of Conformance for details.
Link to GitHub
Link to full additional resources