Initialization - Panasonic WH-ADC0309H3E5 Operating Instructions Manual

3 Temperature of each zone
4 Time and day
5 Water Tank temperature
6 Outdoor temperature
7 Sensor type/Set temperature type icons
Water Temperature
→Compensation curve
Room Thermostat
→External

Initialization

Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of
operation and installing the date and time correctly.
It is recommended that the installer conducts the following initialization of the Remote Controller.
Selecting the language
Press and wait while the display is
initializing.
1 Scroll with and
2 Press
to confi rm the selection.
Setting the clock
1 Select with
or
either 24h or am/pm format (for example, 15:00
or 3 pm).
2 Press
to confi rm the selection.
3 Use
and to select year, month, day,
hour and minutes. (Press
selection each time.)
4 Once the time is set, time and day will appear
on the display even if the Remote Controller is
turned OFF.
Water Temperature
→Direct
Room Thermostat
→Internal
to select the language.
how to display the time,
to confi rm the
Pool only
LCD blinking
9