Menus
For installer
Menu
SG ready
5.13
External compressor SW
5.14
Circulation liquid
5.15
To select whether to circulate
water or glycol in the system.
Heat-Cool SW
5.16
Force heater
5.17
To turn on Force heater either
manually (by default) or
automatically.
6 Installer setup Operation setup
To access to the four major
functions or modes.
6.1
Heat
To set various water & ambient
temperatures for heating.
*
The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
1
*
Only displayed when COOL mode is unlocked (This means when COOL mode is available).
2
18
Default Setting
Setting Options / Display
No
Yes
Capacity (1) & (2) of
120 %
Buffer Tank and DHW
Tank (in %)
No
Water
No
Manual
4 main modes
Heat / *
*
Cool / Auto / Tank
1,
2
Water temp. for heating ON /
Outdoor temp. for heating OFF /
T for heating ON /
Outdoor temp. for heater ON