Sodex Sport S80002 Assembly Instructions

DESCRIPTION
Steel structure
Anti-corrosion coating
Powder coated
CONFORM
The time to make the assembly of the fitness is estimated at 10 minutes at 2 persons.
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
One full year parts and labor guarantee. Every claim regarding the condition of the delivered equipment has to be
done within the legal period,of the reception of the material.
The warranty will not apply to:
- All degradation during the transport.
- All degradation due to poor maintenance.
- All degradation due to use differing from which was intended
- Any defect claimed after the end of the legal period.
- Any damage due to a faulty installation or assembly of the module
ASSEMBLY INSTRUCTIONS
ELLIPTICAL TRAINER
PRODUCT REF
ASSEMBLY TIME
MAINTENANCE
WARRANTY
S80002
:
UNIT
1 1