Setting Up Interface Lock - SPC Modulo Installation And Operating Instructions Manual

7.2 Setting Up Interface Lock

Expert
Select language
Date & Time
Settings
Service values
Menu lock
Factory settings
Interface Mode
Full menu or hide menu (only
actual temperature and
humidity)?
Full
19. ºC
1
80. %
2
Step 1
To set up the interface
lock, go into the expert
section. Click on 'settings'.
Step 3
Default setting is on full
menu. Click on either
the 'positive' or 'negative'
icon to change mode.
Step 5
To deactivate
'hide mode', hold the
upper-right corner
of the display for
around 5 seconds.
IOM 81, Issue 2 - Modulo Thermostat
Settings
Functions
Location
Sensor Offset
Display Brightness
Interface Mode
Interface Mode
Full menu or hide menu (only
actual temperature and
humidity)?
Hide
Menu
Fan Expert
Step 2
Click on 'interface mode'.
Step 4
Once in hide mode.
Click on the arrow to
activate.
Step 6
To return to 'full mode',
click on expert mode, go
back to interface mode
and select 'full' menu.
17