Under the item System button, you have two options which are allowed when the button is pressed, at least one option must be selected: allow factory settings The device can be set to the delivery condition S7-Firewall quick start guide 2 / 9 2021/02/28 20:29...
Routing Mode Machine Routinginterface → LAN WAN/IP IP-Routing over WAN Modem IP-Routing over Modem Routinginterface WAN/PPPOE IP-Routing over PPPoE on WAN-Port WAN/OVPN Routing over OVPN on WAN-Port WAN/Bridge Ethernet-Routing on WAN-Port S7-Firewall quick start guide 3 / 9 2021/02/28 20:29...
If the built-in DHCP server (on the WAN or LAN) is operated, it can be useful to allocate the same IP address to the IP addresses. Here you can specify which MAC address receives which IP address. S7-Firewall quick start guide 4 / 9...
HMI / PG 00: 00: 00 means that the MAC address is not checked. If the value is device not equal to 0, the MAC address of the station must match the input S7-Firewall quick start guide 5 / 9 2021/02/28 20:29...
The rule script In the rule script, the data areas or possible accesses for the respective connection are defined. The script can be reached via the link of the name of the connection. S7-Firewall quick start guide 6 / 9 2021/02/28 20:29...
Page 7
Flag Byte 70 bis Flag Byte 200: MB 70 – MB 200 Output A 10.2 bis Output 14.7: A 10.2 – A14.7 Just after start operands with, -, specify the end operand (end address). The end address is included! S7-Firewall quick start guide 7 / 9 2021/02/28 20:29...