Table of Contents
Advertisement
P
REPARATIONS
Connect to a Mobile Amplifier
+
12V
–
In the connection diagram, the system's power leads should be connected at the same point to minimize noise.
Connect to a TravelPilot DX-N Navigation System
DX-N Main Unit (Rear View)
DX-N Monitor Cable
(supplied with DX-N)
Video Converter
7 607 005 718
Input
15 Pin Serial Cable
(supplied with converter)
DX-N Screen
B
O
EFORE
PERATION
Turn off all the equipment before connections.
Filter
Fuse
Pin 1: 12vdc Constant
5
6
Pin 2: Ground
Pin 3: Reverse Trigger
3
4
Pin 4: 12vdc Output
Pin 5: 12vdc Ignition
1
2
Pin 6: Video Trigger (Plus=FBAS)
Output
Video In
RCA Cable
DVD-ME1
Monitor
REMOTE IN
VIDEO OUT
R
L
AUDIO OUT
DC
12V 1.5A
Mobile Amplifier
Turn off all the equipment before connections.
This schematic describes the installation of an After
Market video source, such as VCR, DVD, TV Tuner, or
Video Game, connected to a Blaupunkt DX-N
Navigation System through a Blaupunkt Video
Converter, P/N 7 607 005 718. The Video Converter is
necessary to convert the source's video signal into a
usable format for the DX-N.
Signal connections include: (a) RCA connection from
the video source's output to the converter's input, (b) 15
pin serial connection between the converter' s output
and the DX-N ROM 15 pin input, and (c) DX-N ROM
connection to the DX-N screen, using the supplied
video cable.
Note: When using a gooseneck mounting adapter, P/N
7 612 001 204, the supplied cable will take the place of
the DX-N monitor cable supplied with the DX-N
Video Line Output
package.
Note: Video source audio connection can be made via
RF modulator to any factory radio or via RCA cable
through an After Market radio if an auxiliary input is
available.
– 9 –
External
Remote
Sensor
Video In
Audio In
Advertisement
Table of Contents
