iflo 898051 Installation

1 x Solas dimmable LED mirror
600 x 500mm
Code: 898051
CARE AND MAINTENANCE:
Ensure that the power is disconnected prior
l
to cleaning.
To maintain the finish of this product, clean with
l
a soft cloth periodically.
Do not use harsh chemical solvents, as this may
l
discolour or damage the finish.
COMPONENTS
1 x Mirror.
Screws and spacers attached
DIMENSIONS:
Height: 600mm
Width: 500mm
Depth: 40mm
1 x instructions 2 x screws and plugs
IMPORTANT SAFETY
INFORMATION:
Please read these instructions carefully before
attempting to install this product. It is advisable to
keep these instructions in a safe place for
future reference.
We recommend that you consult a qualified
electrician. All electrical installations must be
carried out in accordance with current IEE wiring
regulations (BS7671).
This product must not be modified as it may
l
invalidate the warranty and may render the
product unsafe.
This product is only suitable for connecting to a
l
240V 50Hz supply.
Before commencing installation or maintenance,
l
isolate the main electrical supply for the
appropriate circuit at the fuse board.
This product should be used indoors only and
l
can be mounted portrait or landscape.
This mirror should be installed on a smooth flat
l
secure surface.
The wall fixings supplied are only suitable for
l
brick walls. for any other wall substrate please
purchase alternative wall fixings.
When installing please take care to avoid water
l
pipes, joints and electrical cables.
Do not exceed or stretch the cable length of
l
each LED wire.
This mirror contains 243 0.07W LED's, please
l
test that they are working correctly before
hanging.
Pencil
TOOLS REQUIRED
Screw driver Stud detector