Note: After installing a new coin-cell battery, reset the system date and time in the UEFI BIOS menu.
PCI Express card
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 38.
2. Remove the front bezel. See "Front bezel" on page 38.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 40.
Removal steps
Note: If the card is held in place by a retaining latch, press the latch as shown to disengage the latch. Then,
gently remove the card from the slot.
.
Chapter 7
CRU replacement
45